The PicoScope 5000E series comprises high-resolution PC-based oscilloscopes designed for precise measurements and fast signal analysis. The instruments combine 16-bit resolution with high sampling rates, large memory, and extensive analysis capabilities. Thanks to low inherent noise and a high dynamic range, these oscilloscopes are particularly well-suited for demanding applications in development, research, and industry.
The series offers numerous features such as FFT spectrum analysis, serial protocol decoding, DeepMeasure analysis, Math channels, and integrated function and arbitrary waveform generators. The Plus models in the series extend the classic 16-bit architecture with a powerful 8-bit mode featuring higher bandwidth, higher sampling rate, and double the memory. This allows both high-precision and very fast signal waveforms to be analyzed with a single device.
Differences from the other variants
The PicoScope 5463E+ combines high-precision 16-bit measurements with an additional 8-bit high-speed mode. In 16-bit mode, the instrument offers a bandwidth of 100 MHz, while in 8-bit mode, bandwidths up to 350 MHz and sampling rates up to 5 GS/s are possible. This makes the model particularly suitable for developers who want to analyze both precise analog signals and fast digital or near-RF signals.
Compared to the 5462E+, the 5463E+ offers higher bandwidth in both 16-bit and 8-bit modes. However, the maximum bandwidth is lower than that of the 5464E+. Like all Plus models, the device features expanded memory and the additional 8-bit high-speed mode.
Product features:
- Channels: 4 analog inputs
- Bandwidth: 100 MHz in 16-bit mode
- Bandwidth: 350 MHz in 8-bit mode
- Vertical resolution: 8-bit and 16-bit
- Extended vertical resolution: Hardware resolution + 4 bits via software
- Maximum sampling rate: 2.5 GS/s in 16-bit mode, up to 5 GS/s in 8-bit mode
- Memory: up to 1 GS per channel in 16-bit mode, up to 2 GS per channel in 8-bit mode
- Rise time: 3.5 ns in 16-bit mode, 1.2 ns in 8-bit mode
- Selectable bandwidth limits: 20 MHz, 60 MHz, and 100 MHz in 16-bit mode; additionally 200 MHz and 350 MHz in 8-bit mode
- Input connector: BNC jack
- Input impedance: 50 Ω ±2% or 1 MΩ ±1% || 13 pF ±2 pF
- Input coupling: DC at 50 Ω, AC/DC at 1 MΩ
- Input sensitivity: 1 mV/div to 1 V/div at 50 Ω, 1 mV/div to 4 V/div at 1 MΩ
- Input ranges: up to ±5 V at 50 Ω, up to ±20 V at 1 MΩ
- DC gain accuracy: ±(0.5% of the signal + 1 LSB)
- RMS noise: from 0.022 mV in low voltage ranges
- FFT spectrum analysis with up to 1 million FFT points
- Trigger types: Edge, Window, Pulse Width, Dropout, Runt, Interval, and Logic triggers
- Function generator up to 20 MHz with sine, square, triangle, and other waveforms
- Arbitrary waveform generator: 200 MS/s, 32 kS memory, 14-bit resolution
- Serial protocol decoding for CAN, CAN FD, LIN, SPI, I²C, UART, FlexRay, Ethernet, and other standards
- PC connection: USB 3.0 SuperSpeed via USB-C, USB 2.0 compatible
- Dimensions: 221 × 173 × 30 mm
- Weight: less than 0.7 kg
- Operating temperature: 0 to 40 °C
- Warranty: 5 years
.webp "Online Seminar AI")
