The PicoScope 5000E series comprises high-performance PC-based 16-bit oscilloscopes designed for high-precision measurements and fast signal analysis. The instruments combine high vertical resolution with a sampling rate of up to 2.5 GS/s, low inherent noise, and a wide dynamic range of over 73 dB.
The series is ideal for development, debugging, embedded systems, automotive electronics, power electronics, and scientific applications. Extensive features such as FFT spectrum analysis, serial protocol decoding, DeepMeasure, Math channels, and integrated function and arbitrary waveform generators enable versatile analysis of complex signals. The MSO models additionally expand the analog inputs by 16 digital channels for mixed-signal applications.
Differences from other models
The PicoScope 5463E MSO combines four analog channels with 16 digital inputs and offers a bandwidth of 100 MHz at full 16-bit resolution. This model is particularly well-suited for embedded development, digital circuits, and complex mixed-signal analysis where analog and digital signals must be captured simultaneously.
Compared to the 5462E MSO, the 5463E MSO features a higher bandwidth of 100 MHz as well as additional bandwidth filters. Compared to the 5464E MSO, the maximum bandwidth is lower. Like all standard models in the 5000E series, the device operates exclusively in 16-bit mode and does not have the additional 8-bit high-speed mode found in the 5000E+ variants.
Product features:
- Channels: 4 analog channels + 16 digital MSO channels
- Bandwidth: 100 MHz in 16-bit mode
- Vertical resolution: 16 bits
- Extended vertical resolution: Hardware resolution + 4 bits via software
- Maximum sampling rate: 2.5 GS/s on 1 channel, 1.25 GS/s on 2 channels, 625 MS/s on 3 or 4 channels
- Memory: up to 1 GS per channel in 16-bit mode
- Rise time: 3.5 ns
- Selectable bandwidth limits: 20 MHz, 60 MHz, and 100 MHz
- Digital channels: 16 inputs in two 8-bit ports
- Maximum digital input frequency: 100 MHz (200 Mbit/s)
- Digital input voltage: ±20 V dynamic range
- Analog input connector: BNC jack
- Digital input connector: 2.54 mm 20-pin connector
- Analog input impedance: 50 Ω ±2% or 1 MΩ ±1% || 13 pF ±2 pF
- Input coupling: DC at 50 Ω, AC/DC at 1 MΩ
- Input sensitivity: 1 mV/div to 1 V/div at 50 Ω, 1 mV/div to 4 V/div at 1 MΩ
- Input ranges: up to ±5 V at 50 Ω, up to ±20 V at 1 MΩ
- DC gain accuracy: ±(0.5% of the signal + 1 LSB)
- Trigger types: Edge, Window, Pulse Width, Dropout, Runt, Interval, and Logic triggers
- Mixed-signal triggering with combined analog/digital analysis
- Function generator up to 20 MHz with sine, square, triangle, and other waveforms
- Arbitrary waveform generator: 200 MS/s, 32 kS memory, 14-bit resolution
- FFT spectrum analysis with up to 1 million FFT points
- Serial protocol decoding for CAN, CAN FD, LIN, SPI, I²C, UART, FlexRay, and other standards
- PC connection: USB 3.0 SuperSpeed via USB-C, USB 2.0 compatible
- Dimensions: 221 × 173 × 30 mm
- Weight: less than 0.7 kg
- Operating temperature: 0 to 40 °C
- Warranty: 5 years
.webp "Online Seminar AI")
