The PicoScope 5000E series offers high-resolution PC-based oscilloscopes for precise measurements and sophisticated signal analysis. The instruments combine 16-bit resolution with a high sampling rate of up to 2.5 GS/s, low inherent noise, and a dynamic range of over 73 dB. This makes them particularly suitable for applications requiring both high accuracy and fast signal processing.
The series features extensive trigger functions, FFT spectrum analysis, serial protocol decoding, DeepMeasure analysis, Math channels, and integrated function and arbitrary waveform generators. The MSO models expand the analog channels by an additional 16 digital inputs and enable the simultaneous analysis of analog and digital signals in embedded, automotive, and industrial applications.
Differences from the other variants
The PicoScope 5464E MSO is the most powerful mixed-signal model in the classic PicoScope 5000E series. It combines four analog channels with 16 digital inputs and offers a bandwidth of 200 MHz at full 16-bit resolution. This makes the instrument ideal for demanding mixed-signal analysis, high-speed embedded systems, and high-precision laboratory and development applications.
Compared to the 5462E MSO and 5463E MSO, the 5464E MSO offers the highest bandwidth and fastest rise time within the standard 5000E series. Unlike the 5000E+ MSO variants, the device operates exclusively in 16-bit mode and does not feature an additional 8-bit high-speed mode with extended bandwidths up to 500 MHz.
Product Features:
- Channels: 4 analog channels + 16 digital MSO channels
- Bandwidth: 200 MHz in 16-bit mode
- Vertical resolution: 16 bits
- Extended vertical resolution: Hardware resolution + 4 bits via software
- Maximum sampling rate: 2.5 GS/s on 1 channel, 1.25 GS/s on 2 channels, 625 MS/s on 3 or 4 channels
- Memory: up to 1 GS per channel in 16-bit mode
- Rise time: 1.75 ns
- Selectable bandwidth limits: 20 MHz, 60 MHz, 100 MHz, and 200 MHz
- Digital channels: 16 inputs in two 8-bit ports
- Maximum digital input frequency: 100 MHz (200 Mbit/s)
- Digital input voltage: ±20 V dynamic range
- Analog input connector: BNC jack
- Digital input connector: 2.54 mm 20-pin connector
- Analog input impedance: 50 Ω ±2% or 1 MΩ ±1% || 13 pF ±2 pF
- Input coupling: DC at 50 Ω, AC/DC at 1 MΩ
- Input sensitivity: 1 mV/div to 1 V/div at 50 Ω, 1 mV/div to 4 V/div at 1 MΩ
- Input ranges: up to ±5 V at 50 Ω, up to ±20 V at 1 MΩ
- DC gain accuracy: ±(0.5% of the signal + 1 LSB)
- RMS noise: as low as 0.022 mV in low voltage ranges
- Trigger types: Edge, Window, Pulse Width, Dropout, Runt, Interval, and Logic triggers
- Mixed-signal triggering with combined analog/digital analysis
- Function generator up to 20 MHz with sine, square, triangle, and other waveforms
- Arbitrary waveform generator: 200 MS/s, 32 kS memory, 14-bit resolution
- FFT spectrum analysis with up to 1 million FFT points
- Serial protocol decoding for CAN, CAN FD, LIN, SPI, I²C, UART, FlexRay, Ethernet, and other standards
- PC connection: USB 3.0 SuperSpeed via USB-C, USB 2.0 compatible
- Dimensions: 221 × 173 × 30 mm
- Weight: less than 0.7 kg
- Operating temperature: 0 to 40 °C
- Warranty: 5 years
.webp "Online Seminar AI")
