The PicoScope 5000E series comprises high-resolution PC-based oscilloscopes designed for precise measurements and fast signal analysis. The instruments combine 16-bit resolution with high sampling rates, large memory, and extensive analysis functions. Thanks to their low inherent noise and high dynamic range, these oscilloscopes are particularly well-suited for demanding analog and digital measurement tasks.
Typical applications include development, embedded systems, automotive electronics, power electronics, sensor technology, as well as research and education. The series offers extensive trigger functions, FFT spectrum analysis, serial protocol decoding, DeepMeasure analysis, and integrated function and arbitrary waveform generators. The Plus models in the series complement the high 16-bit precision with an 8-bit high-speed mode featuring higher bandwidth and double the memory.
Differences from the other variants
The PicoScope 5462E+ expands the classic 5000E series with an additional 8-bit mode featuring higher bandwidth and double the memory. In 16-bit mode, the device offers a bandwidth of 60 MHz for precise measurements, while in 8-bit mode, bandwidths up to 200 MHz and sampling rates up to 5 GS/s are available.
Compared to the 5462E, the 5462E+ features an additional high-speed mode with enhanced performance specifications. However, compared to the 5463E+ and 5464E+, this model has a lower maximum bandwidth in 16-bit and 8-bit modes. The device is designed for users who want to perform both high-resolution precision measurements and fast signal analysis with a single oscilloscope.
Product Features:
- Channels: 4 analog inputs
- Bandwidth: 60 MHz in 16-bit mode
- Bandwidth: 200 MHz in 8-bit mode
- Vertical resolution: 8-bit and 16-bit
- Extended vertical resolution: Hardware resolution + 4 bits via software
- Maximum sampling rate: 2.5 GS/s in 16-bit mode, up to 5 GS/s in 8-bit mode
- Memory: up to 1 GS per channel in 16-bit mode, up to 2 GS per channel in 8-bit mode
- Rise time: 5.8 ns in 16-bit mode, 1.75 ns in 8-bit mode
- Selectable bandwidth limits: 20 MHz and 60 MHz in 16-bit mode; additionally 100 MHz and 200 MHz in 8-bit mode
- Input connector: BNC jack
- Input impedance: 50 Ω ±2% or 1 MΩ ±1% || 13 pF ±2 pF
- Input coupling: DC at 50 Ω, AC/DC at 1 MΩ
- Input sensitivity: 1 mV/div to 1 V/div at 50 Ω, 1 mV/div to 4 V/div at 1 MΩ
- Input ranges: up to ±5 V at 50 Ω, up to ±20 V at 1 MΩ
- DC gain accuracy: ±(0.5% of the signal + 1 LSB)
- RMS noise: from 0.022 mV in low voltage ranges
- FFT spectrum analysis with up to 1 million FFT points
- Trigger types: Edge, Window, Pulse Width, Dropout, Runt, Interval, and Logic triggers
- Function generator up to 20 MHz with sine, square, triangle, and other waveforms
- Arbitrary waveform generator: 200 MS/s, 32 kS memory, 14-bit resolution
- Serial protocol decoding for CAN, LIN, SPI, I²C, UART, FlexRay, Ethernet, and other standards
- PC connection: USB 3.0 SuperSpeed via USB-C, USB 2.0 compatible
- Dimensions: 221 × 173 × 30 mm
- Weight: less than 0.7 kg
- Operating temperature: 0 to 40 °C
- Warranty: 5 years
.webp "Online Seminar AI")
