The PicoScope 5000E series comprises high-resolution PC-based oscilloscopes designed for precise measurements and fast signal analysis. The instruments combine 16-bit resolution with high sampling rates, large memory, and extensive analysis capabilities. Thanks to their high dynamic range and low inherent noise, these oscilloscopes are particularly well-suited for demanding applications in development, embedded systems, automotive, research, and industry.
The series features extensive trigger functions, FFT spectrum analysis, DeepMeasure analysis, serial protocol decoding, and integrated function and arbitrary waveform generators. The Plus models supplement the high-resolution 16-bit technology with an 8-bit high-speed mode featuring higher bandwidth and larger memory. The MSO variants also expand the devices with 16 digital channels for mixed-signal applications.
Differences from the other variants
The PicoScope 5462E+ MSO combines high-resolution 16-bit measurement technology with an additional 8-bit high-speed mode and integrated digital channels. The device offers four analog inputs and an additional 16 digital MSO channels for simultaneous analysis of analog and digital signals.
In 16-bit mode, the model features a bandwidth of 60 MHz for precise analog measurements. In 8-bit mode, bandwidths up to 200 MHz and sampling rates up to 5 GS/s are available. Compared to the 5462E MSO, the device thus offers significantly higher speeds and double the memory in 8-bit mode. However, compared to the 5463E+ MSO and 5464E+ MSO, the model has a lower maximum bandwidth.
Product features:
- Channels: 4 analog channels + 16 digital MSO channels
- Bandwidth: 60 MHz in 16-bit mode
- Bandwidth: 200 MHz in 8-bit mode
- Vertical resolution: 8-bit and 16-bit
- Extended vertical resolution: Hardware resolution + 4 bits via software
- Maximum sampling rate: 2.5 GS/s in 16-bit mode, up to 5 GS/s in 8-bit mode
- Memory: up to 1 GS per channel in 16-bit mode, up to 2 GS per channel in 8-bit mode
- Rise time: 5.8 ns in 16-bit mode, 1.75 ns in 8-bit mode
- Selectable bandwidth limits: 20 MHz and 60 MHz in 16-bit mode; additionally 100 MHz and 200 MHz in 8-bit mode
- Digital channels: 16 inputs in two 8-bit ports
- Maximum digital input frequency: 100 MHz (200 Mbit/s)
- Digital input voltage: ±20 V dynamic range
- Analog input connector: BNC jack
- Digital input connector: 2.54 mm 20-pin connector
- Analog input impedance: 50 Ω ±2% or 1 MΩ ±1% || 13 pF ±2 pF
- Input coupling: DC at 50 Ω, AC/DC at 1 MΩ
- Input sensitivity: 1 mV/div to 1 V/div at 50 Ω, 1 mV/div to 4 V/div at 1 MΩ
- Input ranges: up to ±5 V at 50 Ω, up to ±20 V at 1 MΩ
- DC gain accuracy: ±(0.5% of the signal + 1 LSB)
- RMS noise: from 0.022 mV in low voltage ranges
- Trigger types: Edge, Window, Pulse Width, Dropout, Runt, Interval, and Logic triggers
- Mixed-signal triggering with combined analog/digital analysis
- Function generator up to 20 MHz with sine, square, triangle, and other waveforms
- Arbitrary waveform generator: 200 MS/s, 32 kS memory, 14-bit resolution
- FFT spectrum analysis with up to 1 million FFT points
- Serial protocol decoding for CAN, CAN FD, LIN, SPI, I²C, UART, FlexRay, Ethernet, and other standards
- Hardware-accelerated display of over 2 GS of data per second in 8-bit mode
- PC connection: USB 3.0 SuperSpeed via USB-C, USB 2.0 compatible
- Dimensions: 221 × 173 × 30 mm
- Weight: less than 0.7 kg
- Operating temperature: 0 to 40 °C
- Warranty: 5 years
.webp "Online Seminar AI")
