The Cinergia GE+ vAC/DC series comprises 13 models from 7.5 kW to 160 kW and offers "Same Power in AC and DC". Each device can freely specify grid characteristics such as voltage, frequency, phase angle and (inter)harmonics up to the 50th order per phase; THDi on the grid side < 3 % at cos φ > 0.98 ensures a clean feed-in. The 30 kHz control loop and extensive interference profiles (including IEC 61000-4-11/-13/-14/-28, LVRT, SEMI-F47) enable reproducible tests. Applications range from electromobility & charging infrastructure to energy storage, PV/PV emulation, smart grids and power HiL.
- Generation of global grids: 3-phase/1-phase/split-phase, independent phase parameters incl. harmonics & ramps.
- Disturbance & standard tests: Dips, flicker, frequency jumps, (inter-)harmonics; editor & ready-made IEC profiles (pre-compliance).
- DC multichannel: Up to three independent bidirectional DC channels (common ground), CV/CC/CP/CR modes, battery test/emulation & PV emulation optional.
- Regenerative & parallelizable: regenerative for energy recovery; master/slave via LWL for power/voltage increase.
- Operation & integration: 4.3″ touch, open Modbus TCP interface (LAN), analog/digital I/Os, data acquisition.
Variant in focus: GE+ 120 vAC/DC
The GE+ 120 vAC/DC model offers a rated output of 108 kW and is one of the most powerful variants in the series. It has been specially developed for high-performance test benches, system integration and energy conversion tests where high currents, precise control and regenerative feedback are required. In AC mode, the device delivers up to 175 A (3-channel) or 525 A (1-channel). In DC mode, ±175 A (3-channel) and ±525 A (1-channel) are available. Thanks to its robust architecture, excellent voltage quality and the option of continuous operation at high loads, the system is ideal for e-mobility applications, battery storage validation, power electronics development and grid simulation.
Comparison with the other models in the series
- Power/scaling: The GE+ 120 vAC/DC offers around 8% more real output power compared to the 100 kW model and marks the entry into the upper high-performance range. It is suitable for large test benches and can be expanded via master/slave connections if required.
- Currents: The high current values enable realistic testing of power components and complete systems, including DC distribution grids, traction systems and fast charging facilities.
- Design: Robust industrial cabinet design (approx. 870 × 590 × 1320 mm, ~400 kg) with efficient cooling system for continuous operation under full load. Optimized for stationary integration in laboratory and industrial environments.
- Functionality: Full range of functions of the series, including grid simulation, fault profiles, (inter)harmonics, frequency variations and IEC pre-compliance tests. Optionally available with battery and PV emulation as well as DC multichannel.
Product features of the series:
- Power range: 13 models from 7.5 kW to 160 kW; same rated power in AC and DC.
- Regenerative & bidirectional: Energy feedback into the grid; reduces connected load & operating costs.
- Grid-side quality: THDi < 3 % and PF > 0.98 at rated power.
- AC output (GE mode): 0...277 Vrms ph-N (up to 295 V with HV option) / 0...480 Vrms ph-ph (up to 510 V with HV option); frequency 10...100 Hz (option up to 400 Hz); THDv < 0.1 % (linear, 230 V/50/60 Hz).
- Harmonic: Up to 50th order per phase (50 independent, incl. HV option). Order per phase (50 independent, incl. 20 freely programmable frequencies/phases).
- DC output: CV (20...750 V; option up to 800 V), CC (0...± 110 % Irated), CP (0...± 200 % Prated), CR (0.1...1000 Ω); rise times typ. 1-2.5 ms.
- Overload capacity: AC up to 200 % (2 s), 150 % (1 min), 125 % (10 min); DC up to 110 % (1 min).
- Control & dynamics: 30 kHz control loop; small signal bandwidth up to 5 kHz (AC).
- Efficiency (grid-side): ≥ 92 % (40-160 kW).
- Interface & Software: 4.3″ touch, open Modbus TCP interface (LAN), isolated analog/digital I/Os, PC GUI, sequencer/steps editor, data logging.
- Standards & safety: CE; EN-50178/EN-62040-1 (safety), EN-62040-2 (EMC), RoHS; emergency stop & interlock.
- Parallel operation: Master/slave via fiber optics (up to 8 devices): AC parallel; DC parallel/serial/serial-parallel.
- Housing/dimensions (examples): 7.5-60 kW approx. 770 × 450 × 1100 mm / ~200 kg; 80-120 kW approx. 870 × 590 × 1320 mm / ~320-400 kg; 160 kW approx. 850 × 900 × 2000 mm / ~680 kg.
