#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
How Thermography Enhances Manufacturing. Machine stoppages, component overheating, or electrical faults—unplanned downti...
Disturbances in the power grid often go unnoticed until systems shut down or equipment fails. Regular power quality asse...
In this practical checklist you will learn how to calibrate your measuring and test instruments effectively – simply, ef...
Modern oscilloscopes of the MXO Series from Rohde & Schwarz enable precise analysis and optimization of electric drivetr...
Manufacturer number: P01120116
| Accuracy current measurement AC/DC: | ±1,5 % / ±1,5 % |
|---|---|
| Article number: | P01120116 |
| Current measuring range AC/DC: | 500 mA - 400 A / 500 mA - 600 A |
| Dimensions (L x W x H) (mm): | 224 x 97 x 44 |
| Diode test / continuity test: | No / No |
| Direction of rotation: | No |
| Enclosure (mm): | 30 |
| Frequency measuring range: | No |
| Hold: | No |
| Measurement method: | RMS |
| Min. / Max. Measurement: | No / No |
| Model: | CA PAC16 |
| Power factor: | Nein |
| Power measurement (active / apparent / reactive): | No / No / No |
| Resistance measuring range: | No |
| Temperature measuring range: | No |
| Warranty (years): | 2 |
| Weight (kg): | 0.44 |
The "PAC" series includes clamp meters that use the Hall effect to measure direct and alternating currents.
Two shapes are offered to enclose 30mm or 2x24mm diameter cables and small busbars.
The series includes the PAC1x clamps and the PAC2x clamps for higher currents.
Improved measurement resolution and accuracy is achieved through the 2 measurement ranges and the simplified Zero DC zero adjustment. Switching to standby mode is selectable.