#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
Without reliable communication, safe operation is impossible. In the aerospace industry, failures are not an option. At ...
In safety-critical development and manufacturing processes, the test architecture determines quality, cost efficiency, a...
Increasing efficiency requirements in vehicles, data centers, and industry are driving new vehicle electrical system and...
Early prevention, comprehensive certification, targeted troubleshooting. In every area of your data center, measuring in...
Manufacturer number: P01120115
| Accuracy current measurement AC/DC: | ±1,5 % / ±1,5 % |
|---|---|
| Article number: | P01120115 |
| Current measuring range AC/DC: | 500 mA - 400 A / 500 mA - 600 A |
| Dimensions (L x W x H) (mm): | 224 x 97 x 44 |
| Diode test / continuity test: | No / No |
| Direction of rotation: | No |
| Enclosure (mm): | 30 |
| Frequency measuring range: | No |
| Hold: | No |
| Measurement method: | RMS |
| Min. / Max. Measurement: | No / No |
| Model: | CA PAC15 |
| Power factor: | Nein |
| Power measurement (active / apparent / reactive): | No / No / No |
| Resistance measuring range: | No |
| Temperature measuring range: | No |
| Warranty (years): | 2 |
| Weight (kg): | 0.44 |
The Chauvin Arnoux PAC 15 clamp meter uses the Hall effect to measure direct and alternating currents with an accuracy of 1.5% + 1V.
The PAC 15 is suitable for cables with a diameter of 30 mm and busbars of 50x10 mm.
The special jaws of the Chauvin Arnoux PAC current clamps allow cables or electrical conductors to be easily hooked in order to enclose them for the measurement.