The Rohde & Schwarz MXO 3 series oscilloscopes feature up to 1 GHz bandwidth (depending on the option), 4 or 8 analog channels, 12-bit ADC (up to 18 bits in HD mode), up to 5 GSa/s, up to 500 Mpts memory per channel and an update rate of up to 4.5 million Wfms/s.
One 500 MHz passive probe per channel is included in the scope of delivery. Wfms/s.
One 500 MHz passive probe per channel is included in the scope of delivery; the series supports the R&S probe interface and therefore a wide range of probes.
Typical applications
- Laboratory & General-Purpose: Time/frequency domain, correlation, logic/protocol analysis and Bode plots directly on the device - the MXO 3 replaces several individual devices in many setups.
- Power conversion: Eight channels enable simultaneous monitoring of three-phase/six-phase inverters, gate drivers and currents/voltages - with high dynamic range thanks to 18-bit HD mode.
- Power sequencing &integrity: Up to 500 Mpts recording length, 1 mV/div sensitivity and ±3 V offset support the precise capture of the smallest ripple/noise events.
- Automotive: Eight channels for PWM gates, bus analysis (e.g. CAN/LIN/SENT) and spectrum analysis for assessing drive behavior.
- Signal integrity & EMC debug: Up to >4.5 Mwfms/s update rate, segmented history and up to 50.000 FFT/s speed up troubleshooting.
MXO38 variant (8 channels)
The MXO38 presented here is the 8-channel variant of the series - ideal for applications that need to acquire and analyze many signals in parallel, such as drives, power sequencing or complex embedded systems
The MXO38 is ideal for multiphase and sequence analysis in a single device. The smaller 4-channel model MXO34 is predestined for classic 4-channel debug tasks with high signal fidelity and trigger performance.
Preconfigured models (configured ex works)
Exclusively for the market launch, all models are also available as preconfigured packages. In addition to the standard accessories, these include the extensive expansion bundle MXO3-PK1 (generator, 500 Mpts, power/FRA apps, protocol decoder, etc.) free of charge. Of course, the bandwidths of the preconfigured packages can also be upgraded at a later date.
Preconfigured MXO38 packages with 8 analog channels
- MXO38-1PK (100 MHz bandwidth): Entry into the 8-channel class with the highest signal quality.
- MXO38-2PK (200 MHz bandwidth): More bandwidth for embedded and power applications.
- MXO38-3PK (350 MHz bandwidth): Ideal for digital/mixed-signal development.
- MXO38-5PK (500 MHz bandwidth): Universally suitable for power and EMC debug.
- MXO38-10PK (1 GHz bandwidth): Maximum bandwidth for high-end developments.
Preconfigured MXO34 - packages with 4 analog channels
- MXO34-1PK (100 MHz bandwidth) to MXO34-10PK (1 GHz bandwidth): for classic 4-channel debug tasks with high signal fidelity and trigger performance.
Product features of the series:
- 4 / 8 analog channels
- Bandwidths ex works: 100 / 200 / 350 / 500 MHz / 1 GHz (bandwidths can also be extended later via upgrade).
- Sampling rate up to 5 GSa/s
- Memory 125 Mpts/channel, optionally 500 Mpts (option MXO3-B105).
- 12-bit ADC (up to 18 bits in HD mode); digital triggering with high sensitivity and adjustable hysteresis.
- Update rate up to 4.5 Mwfms/s; history/segment memory and zone trigger (time and frequency range).
- Analysis: digital trigger, zone trigger (time/frequency), up to 50,000 FFT/s, fast hardware math/measurements.
- Options: 16-Ch-MSO, 50-MHz-AWG, power/FRA applications, extensive protocol decoders (I2C/SPI/UART, CAN/CAN FD/CAN XL/LIN/SENT, ARINC 429/MIL-STD-1553/SpaceWire, SPMI/RFFE, 10BASE-T1S).
- 11.6″ Full-HD display, HDMI-Out; SmartGrid-UI.
- Options: 16-channel MSO (MXO3-B1), 1-channel AWG 50 MHz (MXO3-B6), protocol decoder & power apps (incl. including K31, K36, K510, K520, K530, K550, K560).
- Dimensions: approx. 375 × 233 × 163 mm (5 U)
- Weight: approx. 4 kg
.png "RT-ZC03")
.png "RT-ZC02")
.png "RT-ZC30")
.png "RT-ZC10")
