GW Instek GPP-1326 | DC power supply, 1-channel, load function (CC, CV and CR)

Manufacturer number: GPP-1326

GW Instek GPP-1326 | DC power supply with load function, 1 channel, 0 to 32 V / 0 to 6 A, programmable.

  • Linear DC power supply, 1 channel: 0 - 32 V DC / 0 - 6 A
  • With load function (CC, CV, CR operation)
  • Clear 4.3-inch display (10.9 cm screen diagonal) for optimal readability and monitoring of the measurement process
  • High resolution: Setting 1 mV / 0.1 mA, readback 0.1 mV / 0.1 mA
  • Low ripple and low noise: max. 350 µVrms / 2 mArms (at constant voltage, 5 Hz - 1 MHz)
  • Very fast settling behavior: max. 50 µs
  • Integrated protective devices against overvoltage (OVP), overcurrent (OCP) and overheating (OTP)
  • Output monitoring with alarm and measurement stop function to protect the DUT
  • Output control ON / OFF with adjustable delay
  • Sequence function for individual output signal forms or for dynamic load simulation
  • 8 pre-programmed waveforms facilitate the setting: sine, pulse, square, ramp, stairs up / down / up-down, exponential decrease
  • Logging of the output parameters: min. Recording interval 1 s, max. Recording interval 300 s
  • Storage of up to 10 sequence / delay / recording settings, data transfer possible via USB stick
  • Trigger IN / OUT functions for synchronization with external devices
  • Temperature controlled ventilation to minimize noise
  • Interfaces: RS-232, USB / optional: LAN, GPIB + LAN
  • Dimensions: W 213 x H 145 x D 312 mm / weight: 7.5 kg

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Detaildescription

GPP-1326 | DC power supply, 1-channel, load function (CC, CV and CR)

The measurement strengths of the DC source GPP-1326 from GW Instek lie in the high resolution (setting 1 mV / 0.1 mA and readback 0.1 mV / 0.1 mA), in the optimal residual ripple (max. 350 µVrms / 2 mArms) and particularly fast settling behavior (max. 50 µs). The large 4.3-inch display allows optimal monitoring of the measuring processes and offers clear display modes for the device settings, measured values and output functions.


The monitor function of the GPP series enables the user to define control conditions for a measurement process. An alarm and cancel function reliably protect your DUT from damage. With the sequence function, both the output signal shape can be determined and the sequential power output can be set in constant current (CC) or constant voltage (CV) mode, e.g. B. for dynamic load simulation. Eight preset curve functions for sine, pulse, rectangle, ramp, stairs up / down / up-down and exponential decrease make the setting easier for you. The commands of the GPP series comply with the SCPI requirements and are compatible with the commands of the GPD-X303S series.

Lieferumfang

  • operating manual
  • Power cord
  • 1x GTL-105A test leads (max. 3 A)
  • 1x GTL-104A test leads (max. 10 A)

Alternate products (13 products )

Alternate products (13 products )

GW Instek GPP-4323
DC power supply, 4-channel, load function (CC, CV and CR)

Delivery time upon request

€666.00
GW Instek GPP-2323
DC power supply, 2-channel, load function (CC, CV and CR)

Delivery time upon request

€562.00
GW Instek GPP-3323
DC power supply, 3-channel, load function (CC, CV and CR)

Delivery time upon request

€628.00
GW Instek GPP-3060
Programmable 3-channel DC power supply with load function, 2x30V / 6A, 1x5V / 5A, 385W [...] RS-232, USB, LAN, Ext I / O

1 in stock. Ready to ship in 1 business day

€1,014.00
GW Instek GPP-3060-GPIB
Programmable 3-channel DC power supply with load function, 2x30V / 6A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O, GPIB

Delivery time upon request

€1,128.00
GW Instek GPP-6030
Programmable 3-channel DC power supply with load function, 2x60V / 3A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O

Delivery time upon request

€1,014.00
GW Instek GPP-6030-GPIB
Programmable 3 channel DC power supply with load function, 2x60V / 3A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O, GPIB

Ready to ship in 5 to 10 business days

€1,128.00
GW Instek GPP-4323LG
DC power supply, 4-channel, 2x 32V/3A, 5V/1A, 15V/1A, 217W, incl. load function (CC, CV and CR), incl. LAN & GPIB

Delivery time upon request

€856.00
GW Instek GPP-3323LG
DC power supply, 3-channel, 2x 32V/3A, 5V/5A, 217W, incl. load function (CC, CV and CR), incl. LAN & GPIB

Ready to ship in 5 to 10 business days

€818.00
GW Instek GPP-3323L
DC power supply, 3-channel, 2x 32V/3A, 5V/5A, 217W, incl. load function (CC, CV and CR), incl. LAN

Ready to ship in 5 to 10 business days

€669.00
GW Instek GPP-2323LG
DC power supply, 2-channel, 2x 32V/2A, 192W, incl. load function (CC, CV and CR), incl. LAN & GPIB

Ready to ship in 5 to 10 business days

€752.00
GW Instek GPP-2323L
DC power supply, 2-channel, 2x 32V/2A, 192W, incl. load function (CC, CV and CR), incl. LAN

Ready to ship in 5 to 10 business days

€603.00
GW Instek GPP-4323L
DC power supply, 4-channel, 2x 32V/3A, 5V/1A, 15V/1A, 217W, incl. load function (CC, CV and CR), incl. LAN

Delivery time upon request

€707.00

News and Knowledge

Applications

With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...

13/02/2024
Reading time 5 Min.
476
1
Future & Trends

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
130
0

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products

Product added to compare
Product Compare added Product Compare