#statusMessage#
Do you want to start the compare now?
#statusMessage#
Do you want to start the compare now?
Our electromagnetic environment is heavily burdened due to the multitude of transmitters and sources of interference pre...
Automated test and measurement systems that are fully connected with instrumentation and test data can significantly inc...
Temperature is one of the most common risk factors in industry. Overheating can disrupt processes, reduce quality or cau...
Electric vehicles are the future - but what happens to the batteries when they can no longer be used in cars? Efficient ...
Manufacturer number: APS-7100
AC input: | 1P |
---|---|
AC output: | 1P |
Article number: | 01PS710040GT |
Dimensions (L x W x H) (mm): | 560 x 430 x 88 |
Frequency range: | 45 Hz - 500 Hz |
Grid simulation: | No |
Interfaces: | USB, LAN Optional: GPIB, RS-232 |
Mains feedback: | No |
Measurement functions: | Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF |
Model: | APS-7100 |
Output power (W): | 1,000 |
PLD Testfunction: | No |
Protective devices: | OCP, OPP, OTP and Alarm |
Warranty (years): | 2 |
Weight (kg): | 38 |
max. Power (A): | 8.4 |
max. voltage (V): | 310 |
Please Note: This device is currently delivered without GPIB interface.
The APS-7000 power supply series consists of linear AC voltage sources whose frequency can be varied from 45 Hz to 500 Hz. Each device in this series contains 9 different measurement and test functions V rms, I rms, F, Ipk, W, VA, PF, Ipk hold, CF) and offers a user interface similar to that of the AC power meter. In a rack, 2 height units are required for these AC sources.
With this series, designed as a switched-mode power supply, many different current levels can be generated. From very small currents with very small resolutions, it is e.g. B. optimized for LED production and for standby mode for appropriate consumers. To z. B. the voltage fluctuations of supply networks, as can often be found in public networks, the device not only provides a stable AC output voltage, it also masters 5 methods for abnormal conditions for voltage, frequency and phase, 10 different simulation settings for output power, voltage increase, and voltage drop, 10 different sequence modes in which parameters can be selected such as B. a step-like adaptation to a sine curve, 10 program modes in which the AC output voltage form and the upper limit as well as the exact point of the measurement can be programmed for different DUTs. The rise and fall times can be set in ramp mode for different slope steepnesses of the output voltages. Programmable for voltage surges and dips, which are added to the set AC voltage at pre-defined times.
The series is particularly suitable for applications that require highly complex output voltage waveforms and transients to test their products under abnormal, adverse conditions.
The APS-7100 delivers a maximum output voltage of 310 Vrms at 8.4 arms and an output power of 1000 VA. The output voltage can optionally be increased up to 600 Vrms and the frequency up to 999.9 Hz.
Electric vehicles are the future - but what happens to the batteries when they can no longer be used in cars? Efficient ...
Safety, performance, and durability: Test solutions for battery management systems (BMS).BMSs manage batteries and thus ...
Due to an unavoidable minimum internal resistance - the so-called RDS(on) (minimum on-resistance of the FET between drai...
With the worldwide effort to increase energy conservation and reduce fossil fuel use, electrification is occurring at a ...
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...