#statusMessage#

Do you want to start the compare now?

GW Instek GPE-1205 | Power supply unit, DC, 1 channel, linear, 20 V, 5 A, 100 W

Manufacturer number: GPE-1205

GW Instek GPE-1205 | Power supply unit, DC, 1 channel, linear, 20 V, 5 A, 100 W.

Product features:

  • Output voltage: 0 V to 20 V
  • Output current: 0 A to 5 A
  • Maximum power: 100 W
  • Regulation (voltage): ≤ 0.01 % + 3 mV
  • Regulation (current): ≤ 0.2 % + 3 mA
  • Ripple and noise (CV): ≤ 0.5 mVrms (5 Hz to 1 MHz)
  • Ripple and noise (CC): ≤ 2 mArms
  • Setting/readback accuracy (voltage): ± (0.03 % + 10 mV)
  • Setting/readback accuracy (current): ± (0.3 % + 10 mA)
  • Resolution (voltage): 1 mV / 0.1 mV
  • Resolution (current): 0.1 mA / 0.01 mA
  • Remote sense compensation: up to 1 V
  • Protective functions: OVP (1.0 V to 22.0 V), OCP (0.25 A to 5.5 A)
  • Display: 2.4-inch TFT LCD
  • Mains connection: AC 100 V / 120 V / 220 V / 240 V ±10 %, 50/60 Hz
  • Power consumption: 300 VA
  • Dimensions: 107 mm (W) × 124 mm (H) × 313 mm (D)
  • Weight: approx. 5.2 kg

Description

GPE-1205 | Power supply unit, DC, 1 channel, linear, 20 V, 5 A, 100 W

The GPE-1000 series from GW Instek is the modern successor to the proven GPS-S series, which has been known for decades for its reliability, stability and precision. The new GPE-1000 series sets new standards in laboratory power supply with intelligent functions, increased accuracy and improved operability. It is based on linear control technology, which guarantees a particularly low-noise and stable output voltage.

General features:

  • High resolution: Setting up to 1 mV / 0.1 mA, readback accuracy up to 0.1 mV / 10 µA
  • Clear 2,4-inch TFT LCD display for precise reading of voltage and current
  • Remote compensation (Remote Sense) for voltage loss compensation at the load connections
  • Series and parallel connection of two devices of the same model series for higher voltages or currents
  • Multiple protection functions: OVP (over-voltage protection), OCP (over-current protection), OTP (over-temperature protection), reverse polarity protection
  • Control panel lock function to protect against unintentional adjustment
  • Temperature-controlled fan for quiet operation
  • Suitable for rack mounting with optional GRA-441-J/E kit

Possible applications:

The GPE-1000 series is particularly suitable for:

  • Research and development
  • Laboratory environments in educational institutions
  • Test and inspection applications in electronics manufacturing
  • Measurements on sensitive electronic components

Alternate products (1 products)

Alternate products (1 product)

GPE-1323
New
New
GW Instek
GPE-1323
Power supply unit, DC, 1 channel, linear, 32 V, 3 A, 96 W
Delivery time upon request
On Request

News and Knowledge

Measurement Tip

With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...

13/02/2024
Reading time 5 Min.
877
4
Applications & Articles

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
456
2

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products