EA Elektro-Automatik PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue

Name: PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue
Brand: EA Elektro-Automatik
SKU: PS10750-062U
Price: 3900.0 EUR
Availability: OutOfStock

Manufacturer number: PS10750-062U

Delivery time upon request

€3,900.00

plus VAT. €4,641.00 VAT plus shipping costs

We are there for you!

We would be happy to advice you on which alternative best suites your requirements

You would like to request an offer? Please add items to the shopping cart and request an offer there.

Request educational price

EA electric automatic PS 10750-06 | Programmable DC power supply, 1 channel, 750 V / 6 A / 1.5 kW, 2U, USB, analogue.

Number of channels: 1
Rated Voltage Range: 0-750V
Residual ripple CV rms: 50 mV BW 300 kHz
Residual ripple CV pp: 500 mV BW 20 MHz
Rated Current Range: 0-6A
Power: 0 - 1,500 W (1,200 W with derating for 110 V AC)
Nominal resistance range: 4Ω - 6000Ω
Output Capacitance: 40uF
Efficiency source / sink: 95%
Frequency: 45-66Hz
Power factor: >0.99
Leakage Current: <3.5mA
Overvoltage category: 2
Pollution degree: 2
Protection functions: OVP, OCP, OPP, OT
Digital interfaces: USB, Ethernet (100 MBit) for communication, 1x USB host for data acquisition
Expandable interfaces: CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, add. Ethernet with one or two ports
Analog interface: 15-pin D-Sub

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

AC input:	110 - 240 VAC
Additional functions:	Regelmodus CV, CC, CP TFT - Touchfunktion
Article number:	06230945
Autorange:	Ja
Bidirectional:	Nein
Dimensions (L x W x H) (mm):	462 x 482,6 x 88,9
Interfaces:	USB, Ethernet, Analog
Model:	PS10750-062U
Output power (kW):	1.5
Power factor:	> 0,99
Protective devices:	OVP, OCP, OPP, OTP
Warranty (years):	2
Weight (kg):	9.5
max. Power (A):	6
max. Voltage (V):	750

Detaildescription

PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue

The DC laboratory power supplies of the EA Elektro-Automatik PS 10000 series convert the energy from the mains into a regulated DC voltage with an efficiency of over 96%. The PS 10000 series includes single-phase and three-phase devices that, with their wide input range, can serve almost all mains voltages worldwide.

The DC voltages and currents are oriented to the application, the spectrum ranges from 0 - 60 V to 0 - 2000 V and from 0 - 6 A to 0 - 1000 A in one device. The DC power supplies act as a flexible output stage with a constant performance characteristic, the so-called autoranging, as well as a large voltage, current and power range.

In order to achieve higher power and currents, all devices have a master-slave bus. With 64 devices connected in parallel, this enables a system to be set up that provides up to 1920 kW and 64000 A. This system works like a single device and can consist of different power classes, only the voltage class must match. For example, you can set up a 75 kW system from two 30 kW and one 15 kW devices from the PS 10000 series. In addition, typical functionalities from the laboratory area are available. This includes alarm and warning management, various digital interfaces, software solutions and many other functions.

The EA PS 10000 power supplies are ideal for testing relays in production. The coils of the DC relays and the contacts are supplied with precisely defined voltages and currents. When testing the coils, important parameters such as response, operating, holding and dropout currents as well as the associated voltages must be checked and documented. Not only the current carrying capacity and the contact resistance are important parameters for the contacts, but also the dielectric strength and breaking capacity say a lot about the quality of the products.

In an on-board charger test (OBC), its electrical properties must be checked under various conditions. This requires a flexible test system that also provides measurement data. With the sequencing & logging function, test sequences can be loaded into the PS 10000 devices and data can be read out and saved. In this way, you can generate reproducible test results based on dynamic and highly accurate setting and measurement data in the shortest possible time. In order to prevent the two separate control circuits of the device under test (DUT) and the test device from oscillating against each other during testing, the control dynamics of the power supplies can be adjusted: The PS 10000 devices can be set using the three modes Normal, Fast and Slow match the control properties of the on-board charger.

The PS 10750-06 variant of the PS 10000 power supply series presented here measures 2 HE (2U) and has 0 – 750 V, 0 – 6 A, 0 – 1,500 W.

General characteristics of the series:

Wide input range, 110V - 240V +10% 1ph AC
Active power factor correction, typically 0.99
Very high efficiency of over 95%
Voltage from 0 - 60 V to 0 - 1500 V
Current from 0 - 6 A to 0 - 120 A
Flexible power-controlled DC output stages (autoranging)
Control mode CV, CC, CP, CR with fast transition
Digital control, high resolution with 16bit ADCs and DACs, control speed selection: Normal, Fast, Slow
Colored 5" TFT display, touch function and intuitive operation
Galvanically isolated share bus for parallel operation of all performance classes in the 10000 series
Master-slave bus for parallel operation, up to 64 devices of all performance classes of the 10000 series
Standard interfaces: USB, Ethernet, analog, USB host, master-slave bus, share bus
Optional interfaces: CAN, CANopen, RS232, Profibus, EtherCAT, Profinet with one or two ports, Modbus with one or two ports, add. Ethernet with one or two ports
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

Alternate products (13 products )

Serie

Serie

EA Elektro-Automatik PS10060-1202U

DC power supply, PS 10000, 1 channel, 60V / 120A / 3kW, USB, analogue

Delivery time upon request

€4,800.00

Serie

Serie

EA Elektro-Automatik PS10060-602U

DC power supply, PS 10000, 1 channel, 60V / 60A / 1.5kW, USB, analogue

Delivery time upon request

€3,700.00

Serie

Serie

EA Elektro-Automatik PS10080-1202U

DC power supply, PS 10000, 1 channel, 80V / 120A / 3kW, USB, analogue

Delivery time upon request

€4,800.00

Serie

Serie

EA Elektro-Automatik PS10080-602U

DC power supply, PS 10000, 1 channel, 80V / 60A / 1.5kW, USB, analogue

Delivery time upon request

€3,700.00

Serie

Serie

EA Elektro-Automatik PS10200-252U

DC power supply, PS 10000, 1 channel, 200V / 25A / 1.5kW, USB, anal

Delivery time upon request

€3,700.00

Serie

Serie

EA Elektro-Automatik PS10200-502U

DC power supply, PS 10000, 1 channel, 200V / 50A / 3kW, USB, analogue

6 in stock. Ready to ship in 1 business day

€4,800.00

Serie

Serie

EA Elektro-Automatik PS10360-152U

DC power supply, PS 10000, 1 channel, 360V / 15A / 1.5kW, USB, analogue

Delivery time upon request

€3,700.00

Serie

Serie

EA Elektro-Automatik PS10360-302U

DC power supply, PS 10000, 1 channel, 360V / 30A / 3kW, USB, analogue

Delivery time upon request

€4,800.00

Serie

Serie

EA Elektro-Automatik PS10500-102U

DC power supply, PS 10000, 1 channel, 500V / 10A / 1.5kW, USB, anal

Delivery time upon request

€3,900.00

Serie

Serie

EA Elektro-Automatik PS10500-202U

DC power supply, PS 10000, 1 channel, 500V / 20A / 3kW, USB, analogue

1 in stock. Ready to ship in 1 business day

€5,000.00

Serie

Serie

EA Elektro-Automatik PS10750-122U

DC power supply, PS 10000, 1 channel, 750V / 12A / 3kW, USB, analogue

Delivery time upon request

€5,000.00

Serie

Serie

EA Elektro-Automatik PS11000-102U

DC power supply, PS 10000, 1 channel, 1000V / 10A / 3kW, USB, analogue

2 in stock. Ready to ship in 1 business day

€5,300.00

Serie

Serie

EA Elektro-Automatik PS11500-062U

DC power supply, PS 10000, 1 channel, 1500V / 6A / 3kW, USB, analogue

Delivery time upon request

€5,300.00

News and Knowledge

Applications

Simulating solar cells with bidirectional DC power supplies.

With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...

13/02/2024

Reading time 5 Min.

475

Future & Trends

Modern applications for power supplies.

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021

Reading time 5 Min.

129

About the Manufacturer

EA Elektro-Automatik

EA Elektro-Automatik is one of the leading German manufacturers of laboratory power supplies and electronic loads for research and development as well as industrial applications in control and automation, electrochemistry, automated test systems and test benches.

EA Elektro-Automatik PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue

EA electric automatic PS 10750-06 | Programmable DC power supply, 1 channel, 750 V / 6 A / 1.5 kW, 2U, USB, analogue.

Technical Data

Documents & Downloads

Detaildescription

PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue

General characteristics of the series:

Alternate products (13 products )

Alternate products (13 products )

News and Knowledge

About the Manufacturer

Last Seen Products