Chroma 62060D-100 | Power supply, bidirectional, DC, 1 channel 100V / +/- 180A, 6kW

Manufacturer number: 62060D-100

Chroma 62060D-100 | Bidirectional power supply 62000D series, two-quadrant operation, 0… 100 V, ± 180 A, ± 6,000 W, 3 U, for battery simulation, charge / discharge test procedure, LV123 & LV148 compliant.

  • Voltage: 0… 100 V
  • Current: ± 180 A
  • Power: ± 6,000 W.
  • Mains regulation (voltage): ± 0.01% EW
  • Grid control (current): ± 0.05% EW
  • Load regulation (voltage): ± 0.02% EW
  • Load regulation (current): ± 0.1% EW
  • Voltage measurement: 20 V / 100 V
  • Current measurement: 36 A / 180 A
  • Response time: 10 ms
  • Operating mode: CC, CV, CP
  • Dimensions (H x W x D): 133 mm x 428 mm x 730 mm
  • Weight: 37 kg

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Detaildescription

62060D-100 | Power supply, bidirectional, DC, 1 channel 100V / +/- 180A, 6kW

The bidirectional power supply units of the Chroma ATE 62000D series combine excellent rated outputs from 0 - 1,800 V / up to 540 A / up to 18 kW and are housed in a housing with a high power density of only 3U (3U).

In simple master / slave parallel and serial operation, several individual devices can be interconnected for a total output of up to 180 kW.

The 62000D series offers two-quadrant operation; This means that the devices can work as a DC source and as a DC load without switching times and thus guarantee a high level of protection for the corresponding test objects.

In load operation, up to 93% of the power consumed can be fed into the supply network.

The devices can work in the constant voltage, constant current and constant power modes.

The power supply units of the 62000D series are ideal for testing power systems for renewable energies such as PV, storage and EV inverters, and can also be used as a battery simulator.

With the help of soft panels, they simulate state of charge conditions (SOC / State of Charge) or specific VI curves of the battery characteristics in order to evaluate the charging or discharging of lithium-ion batteries and to add built-in bidirectional on-board chargers, bidirectional DC converters and DC-AC motor drivers check.

To control complex test sequences, the 62000D series offers automatic sequence programming, programmable voltage and current rise times. Fast control behavior as well as low output noise and low ripple allow precise tests.

USB / LAN and analog interfaces are available as standard, CAN and GPIB are optionally available.

Its intuitive touchscreen and intelligent user interface shorten the test time considerably and simplify complex test procedures.

The Chroma 62060D-100 variant has 0… 100 V, ± 180 A, ± 6 kW. Other models are available (see below under: Alternatives | Other models).

Use:

  • Charge / discharge test procedures and service life test procedures, including BOBC, DC-DC conversion and PCS
  • Motor driver check for DC-AC power supply and energy recovery
  • Pre-conformity test for LV123 and LV148 for testing electrical vehicle components
  • Simulation of an IV power source for energy storage, battery and fuel cell in microgrid laboratories
  • Battery current simulation for testing propulsion and auxiliary systems for battery-powered vehicles on land, water and in the air

Accessoires (2 products )

Exclusive
Chroma A620039
GPIB interface for 12kW / 18kW power supplies

4 in stock. Ready to ship in 1 business day

€750.00
Exclusive
Chroma A620045
CAN interface for power supply 62000D series

Delivery time upon request

€410.00

Alternate products (9 products )

Exclusive
Chroma 62060D-600
Power supply, bidirectional, DC, 1 channel 600V / +/- 40A, 6kW

Delivery time upon request

€16,250.00
Exclusive
Chroma 62120D-100
Power supply, bidirectional, DC, 1 channel 100V / +/- 360A, 12kW

Delivery time upon request

€21,650.00
Exclusive
Chroma 62120D-1200
Power supply, bidirectional, DC, 1 channel 1200V / +/- 40A, 12kW

Delivery time upon request

€21,650.00
Exclusive
Chroma 62120D-600
Power supply, bidirectional, DC, 1 channel 600V / +/- 80A, 12kW

Delivery time upon request

€21,650.00
Exclusive
Chroma 62180D-100
Power supply, bidirectional, DC, 1 channel, 100V / +/- 540A, 18kW

Delivery time upon request

€28,530.00
Exclusive
Chroma 62180D-1200
Power supply, bidirectional, DC, 1 channel, 1200V / +/- 40A, 18kW

Delivery time upon request

€28,530.00
Exclusive
Chroma 62180D-1800
Power supply unit, bidirectional, DC, 1 channel, 1800V / +/- 40A, 18kW

Delivery time upon request

€29,510.00
Exclusive
Chroma 62180D-600
Power supply, bidirectional, DC, 1 channel, 600V / +/- 120A, 18kW

Delivery time upon request

€28,530.00
New
dataTec BOBC_RT_241210
Seminar “On-board charger tests with AC/DC sources & sinks”, December 10, 2024, Reutlingen

Delivery time upon request

€549.00

News and Knowledge

Applications

With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...

13/02/2024
Reading time 5 Min.
307
1
Future & Trends

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
103
0

About the Manufacturer

Chroma
Chroma ATE is the world's largest supplier of power test instruments and systems, including programmable AC sources and DC power supplies, laboratory power supplies, AC and DC electronic loads, digital meters, multimeters, and automated test systems.

Last Seen Products

Product added to compare
Product Compare added Product Compare