#statusMessage#

Do you want to start the compare now?

Keysight N9962A | FieldFox handheld µW spectrum analyzer 9 kHz to 50 GHz, USB 2.0, LAN, rechargeable battery

Manufacturer number: N9962A

Keysight N9962A | FieldFox, High Frequency Spectrum Analyzer 300 kHz to 50 GHz.

  • Frequency range: 300kHz to 50GHz
  • Directivity >42dB
  • Dynamic range 104 dB
  • DANL: -153 dBm (specified), typical -158 dBm at 2.8 to 4.5 GHz
  • Typical output power (6.5 to 18 GHz): 4 dBm (frequency dependent)
  • Flat output power frequency response (± 0.5 dB) at an output power of -15 dBm in the frequency range 300 kHz to 50 GHz
  • Return Loss and VSWR (Voltage Standing Wave Ratio) measurements
  • Output power adjustable in 1 dB steps
  • Built-in power meter: 5 kHz to 50 GHz
  • Optional power measurement by Keysight USB RF power sensor. Frequency range depends on the type of power meter used)
  • Battery life 3.5 hours
  • Closed housing, dustproof, without fans etc.
    • Water repellent; resists salty and humid influences
  • Meets the requirements of: IEC/EN 60529, MIL-PRF-28800F Class 2 and MIL-STD-810G, Method 511.5, Procedure I (conditions for use in potentially explosive atmospheres)
  • Dimensions: Width: 188mm, Height: 292mm, Depth: 72mm
  • Weight: 3.2kg

Typical areas of application:

  • satellite communications
  • mobile communication
  • radar technology
  • Aerospace and defense technology
  • Active and passive component and module test

Options:
For cable and antenna test:

  • Return Loss and VSWR (Voltage Standing Wave Ratio) measurements

For use as a spectrum analyzer:

  • Extended range for transmission analysis (ERTA / Extended Range Transmission Analysis)
  • Tracking generator over the complete device frequency range
  • preamp
  • Interference analyzer and spectrogram
  • Timegating option for spectrum measurements

For RF power measurements:

  • Frequency dependent USB RF power measurements
  • USB interface for connecting USB RF power sensors
  • Integrated power meter to measure over a user-definable frequency range
  • Pulse measurements (radar) with a peak RF power meter

For general system properties:

  • GPS receiver
  • Variable DC voltage source 1 V to 32 V, 650 mA max and 8 W max
  • remote control

Note: This list does not claim to be complete. Before ordering, please consult our office staff.

Technical Data

Description

N9962A | FieldFox handheld µW spectrum analyzer 9 kHz to 50 GHz, USB 2.0, LAN, rechargeable battery

The Keysight N9962A Fast Spectrum Analyzer is a mobile, handheld device that includes two types of devices: a spectrum analyzer and an RF power meter. This device is intended for rough field use in its basic configuration for spectrum measurements and HF pulse measurements (radar). The integrated HF power measurement option offers measurement of the HF signal power at the push of a button over a bandwidth that can be defined by the user. With an optional extension, USB power sensors can also be connected directly. By using USB peak power sensors, the pulse peak power and the average power can be measured on radar systems in order to have the ratio of peak power to average power displayed directly.

With this device you have Keysight quality and accuracy in your hands - because it is portable, fits well and is easy to use.

The device can be adapted to the respective application using further optional and retrofittable configuration options (see list at the end of this description).

It should be emphasized that this device can be equipped with a tracking generator covering the entire frequency range of the device.

Accessoires

N9962A-353
Keysight
N9962A-353
IQ streaming for FieldFox N9962A
Delivery time upon request
On Request
N9962A-1A7
Exclusive
Exclusive
Keysight
N9962A-1A7
Calibration + Uncertainties + Guardbanding (Not Accredited)
Delivery time upon request
On Request
N9962A-208
Exclusive
Exclusive
Keysight
N9962A-208
USB power sensor measurements versus frequency for FieldFox N9962A
Delivery time upon request
On Request
N9962A-209
Exclusive
Exclusive
Keysight
N9962A-209
Extended range transmission analysis (ERTA) for FieldFox N9962A
Delivery time upon request
On Request
N9962A-235
Exclusive
Exclusive
Keysight
N9962A-235
Pre-amplifier for FieldFox N9962A
Delivery time upon request
On Request
N9962A-236
Exclusive
Exclusive
Keysight
N9962A-236
Interference analyzer and spectrogram for FieldFox N9962A
Delivery time upon request
On Request
N9962A-307
Exclusive
Exclusive
Keysight
N9962A-307
GPS receiver for FieldFox N9962A
Delivery time upon request
On Request
N9962A-312
Exclusive
Exclusive
Keysight
N9962A-312
Channel scanner for FieldFox N9962A
Delivery time upon request
On Request
N9962A-350
Exclusive
Exclusive
Keysight
N9962A-350
Real-time spectrum analyzer (RTSA) for FieldFox N9962A
Delivery time upon request
On Request
N9962A-351
Exclusive
Exclusive
Keysight
N9962A-351
I/Q analyzer for FieldFox N9962A
Delivery time upon request
On Request
N9962A-356
Exclusive
Exclusive
Keysight
N9962A-356
Noise figure measurements for FieldFox N9962A
Delivery time upon request
On Request
N9962A-C3
Exclusive
Exclusive
Keysight
N9962A-C3
Calibration Plan - Return to Keysight - 3 years
Delivery time upon request
On Request

Recommendations

89601203C
Keysight
89601203C
PathWave Vector Signal Analysis Base Platform - Essentials Tier
Ready to ship in 5 to 10 business days
On Request

News and Knowledge

Measurement Tip

The spectrum analyzer is an indispensable piece of measuring equipment in development, production or quality assurance. ...

14/12/2022
Reading time 4 Min.
1747
0

About the Manufacturer

Keysight
dataTec and Keysight Technologies have had a strong partnership since 1999. No other company offers such a wide range of measurement technology, testing solutions, and solutions for our connected world. With Keysight's measuring instruments, you are also well-equipped for today's and tomorrow's tasks.

Last Seen Products