#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
How Thermography Enhances Manufacturing. Machine stoppages, component overheating, or electrical faults—unplanned downti...
Disturbances in the power grid often go unnoticed until systems shut down or equipment fails. Regular power quality asse...
In this practical checklist you will learn how to calibrate your measuring and test instruments effectively – simply, ef...
Modern oscilloscopes of the MXO Series from Rohde & Schwarz enable precise analysis and optimization of electric drivetr...
Manufacturer number: PP0001A
| Weight (kg): | 0 |
|---|
Note: The adapter PP0004A is required to use the probe with the Autoprobe I interface.
The Hi-Z + Probe PP0001A is Keysight's first passive probe with an analog bandwidth of up to 1 GHz and a capacitive load of less than 4 pF . It offers all of the user-friendly benefits of a passive probe with the performance normally found in an active probe. The AutoProbe I interface offers offset and auto configuration of the probe type and the attenuation setting.
The PP0001A is intended for use on InfiniiVision and Infiniium oscilloscopes with the AutoProbe I interface using the PP0004A adapter .
The probes PP0001A / 2A / 3A are a new generation of Hi-Z + probes in which the probe can be seen as a combination of probe and probe adapter (PP0004A). This combination does not have a fixed damping ratio, but rather several available damping ratios per given V / div setting in order to enable a very large dynamic range and a flat frequency response.