Keysight 34933A | 4 x 8 reed matrix for data logger 34980A

Manufacturer number: 34933A

Keysight 34933A | Dual / Quad 4x8 relay matrix plug-in module for modular measurement data acquisition / switching system 34980A.

  • Two 4x8, 8x8, or 4x16 2-wire configurations are possible
  • 64 2-wire or 128 1-wire as a cross-point version
  • High speed reed relay
  • Connection to the internal digital multimeter
  • Expandable with four 2-wire analog bus lines
  • Relay counter
  • Switching capacity ± 150V peak voltage, 1.5A continuous current; 0.5A switching current
  • Module connection: 2 - 50-pin Dsub, male
  • Warranty: 3 years

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Detaildescription

34933A | 4 x 8 reed matrix for data logger 34980A

The 34933A module is a slot for the Keysight (formerly Agilent's electronic measurement technology) 34980A measurement data acquisition system and, with the 4x8 relay matrix, offers a universally usable and very densely packed unit for simultaneously using different measurement instruments at different test points of a module to be tested (DUT / Device Under Test).

Several matrix modules can be controlled via the analog bus of the 34980A in order to be able to set up a measuring system with an even higher number of channels. 1024 channels can be realized with 2-wire measurements - and this with a basic device.

This module can be configured as a single wire matrix to increase the number of channels. Several matrix modules can be controlled via the analog bus of the 34980A in order to be able to set up a measuring system with an even higher number of channels. 1024 channels can be implemented as 1-wire measurements - and this with a basic device.
This module can also be configured for 1 or 2-wire measurement. The optional connector blocks and the very tightly packed screw contact strips offer enough space for the cables and establish a robust connection to the DUT (Device Under Test).

The standard 78-pin Dsub connector can be used to contact normal cables and terminal strips.

Accessoires (5 products )

Keysight 34933T
Terminal block for module 34933A

4 in stock. Ready to ship in 1 business day

€305.00
Keysight Y1136A
D-SUB cable 50-pin, 3 m, M / F twisted pair

10 in stock. Ready to ship in 1 business day

€170.00
Keysight Y1135A
D-SUB cable 50-pin, 1.5 m, M / F twisted pair

2 in stock. Ready to ship in 1 business day

€154.00
Keysight Y1139A
Solder Cup Connector Kit for D-SUB 50-pin, female

Delivery time upon request

€153.00
€3,896.00

Alternate products (3 products )

Keysight 34932A
Dual 4x16 Armature Matrix module for data logger 34980A

Reordered - in stock. Delivery time on request

€2,298.00
Keysight 34931A
Dual 4x8 Armature Matrix module for data logger 34980A

Reordered - in stock. Delivery time on request

€1,484.00
Keysight 34934A
High density 512-crosspoint reed matrix for data logger 34980A

Delivery time upon request

€7,712.00

Recommendations (1 product )

€3,896.00

About the Manufacturer

Keysight
dataTec and Keysight Technologies have had a strong partnership since 1999. No other company offers such a wide range of measurement technology, testing solutions, and solutions for our connected world. With Keysight's measuring instruments, you are also well-equipped for today's and tomorrow's tasks.

Last Seen Products

Product added to compare
Product Compare added Product Compare