#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
Without reliable communication, safe operation is impossible. In the aerospace industry, failures are not an option. At ...
In safety-critical development and manufacturing processes, the test architecture determines quality, cost efficiency, a...
Increasing efficiency requirements in vehicles, data centers, and industry are driving new vehicle electrical system and...
Early prevention, comprehensive certification, targeted troubleshooting. In every area of your data center, measuring in...
Manufacturer number: 2010/E
| 2-/4-wire: | 2-/4 |
|---|---|
| Accuracy voltage measurement AC: | 0,06 % |
| Accuracy voltage measurement DC: | 0,0037 % |
| Article number: | 2010/E |
| Current measuring range AC: | 1 µA - 3 A |
| Current measuring range DC: | 10 mA - 3 A |
| Dimensions (L x W x H) (mm): | 370 x 238 x 104 |
| Diode test / continuity test: | Yes / Yes |
| Display: | numeric, VFD |
| Frequency measuring range: | 3 Hz - 500 kHz |
| Interfaces: | RS232, GPIB |
| Measurements per second: | 2,000 |
| Model: | 2010/E |
| Number of positions: | 7.5 |
| Resistance measuring range: | 10 Ω - 100 MΩ |
| Special features: | Low noise, opt. multiplexer card, European model |
| Temperature measurement: | Yes |
| Voltage measuring range AC: | 100 mV - 750 V |
| Warranty (years): | 1 |
| Weight (kg): | 5.44 |
| max. Measuring range DC (V): | 1,000 |
| min. Measuring range DC (mV): | 100 |
The 7 ½ digit low noise multimeter of the 2010 series combines cost efficiency and high resolution with the throughput and accuracy required for high-speed DMM applications such as test accuracy sensors, converters, A / D and D / A converters, controllers, references, Plug connections, switches and relays are required. Based on the same low-noise, high-speed A / D converter technology as in the 2000, 2001 and 2002 series, the 2010 series offers four additional unique functions for resistance measurement. This series is perfect for characterizing resistance, linearity or isolating contacts, connectors, switches and relays.