#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
How Thermography Enhances Manufacturing. Machine stoppages, component overheating, or electrical faults—unplanned downti...
Disturbances in the power grid often go unnoticed until systems shut down or equipment fails. Regular power quality asse...
In this practical checklist you will learn how to calibrate your measuring and test instruments effectively – simply, ef...
Modern oscilloscopes of the MXO Series from Rohde & Schwarz enable precise analysis and optimization of electric drivetr...
Manufacturer number: HFE2500-12
| AC input: | 85 V - 265 V |
|---|---|
| Additional functions: | Front panel LED indicator: AC OK, DC OK / Fail |
| Article number: | HFE2500-12 |
| Autorange: | No |
| Bidirectional: | No |
| Dimensions (L x W x H) (mm): | 325 x 107 x 40.1 |
| Model: | HFE2500-12 |
| Number of outputs: | 1 |
| Output power (W): | 2,400 |
| Output sequence: | No |
| Power factor: | > 0.98 @ full load |
| Protective devices: | OVP, OCP, OTP |
| Warranty (years): | 3 |
| Weight (kg): | 2.1 |
| max. Power (A): | 200 |
| max. voltage (V): | 12 |
With its market-leading power density of 1.77 W / cm³, the HFE2500 is equally suitable for central and distributed high-performance architectures (DPA - Distributed Power Architecture). All HFE models are capable of parallel switching and N + 1 redundancy with ORing MOSFET decoupling and active load sharing; As a result, the power supplies are also ideal for hot-swap and redundancy requirements, for example in applications in server technology, data and telecommunications, data storage, broadcasting, military (COTS), medical or process control and automation. With their universal input (85- 265 V AC), the HFE power supplies can be used worldwide. Their high efficiency (up to 93% for the HFE2500) minimizes heat loss and power consumption. The output voltage can be changed by up to ± 20% of the nominal value, so that the devices can also be adapted to special voltage requirements. The voltage value can be set via a resistor, external control voltage or via the optional PMBus-compatible I²C interface. The devices are equipped with overvoltage, overload and overtemperature protection as standard. For system monitoring and control, the signal outputs DC OK, AC fail, overtemperature and "PS exists" (power supply plugged in) as well as inputs for remote on / off and remote sense (compensation of a voltage drop across the output lines) are available is also possible via the optional PMBus-compatible I²C interface, which also includes an alarm in the event of a fan failure.
Electric vehicles are the future - but what happens to the batteries when they can no longer be used in cars? Efficient ...
Safety, performance, and durability: Test solutions for battery management systems (BMS).BMSs manage batteries and thus ...
Due to an unavoidable minimum internal resistance - the so-called RDS(on) (minimum on-resistance of the FET between drai...
With the worldwide effort to increase energy conservation and reduce fossil fuel use, electrification is occurring at a ...
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...