The DAQ973A measurement data acquisition system expands Keysight’s high-performance data logger lineup. The modular system consists of a base unit with slots for up to three of the eight available measurement modules. This results in an exceptionally wide—and, above all, cost-effective—range of applications for the development and production of electronic components, ensuring that your test equipment remains adaptable for future applications.
The internal 6.5-digit digital multimeter (22-bit) enables highly precise and very fast measurements with a scan rate of up to 450 channels per second. The data logger allows you to directly measure temperatures, DC and AC voltage, DC and AC current, resistance (2- or 4-wire measurement), frequencies, and periods, as well as perform capacitance measurements and diode tests. Depending on the application, up to three identical or different modules can be used for switching, acquiring measurement data, and process control. This provides up to 120 measurement channels in 1-wire configuration or 60 measurement channels in 2-wire configuration. 4-wire measurements are also possible.
On the LCD graphic display, the measured values can be shown not only numerically but also as a trend chart, bar graph, or histogram, giving you a comprehensive overview of your measurement. The measurement data can be stored internally (100,000 data points) and can also be conveniently saved to a USB flash drive and transferred to a PC for further analysis.
User-friendly device control, test configuration, and data transfer are handled via the BenchVue DAQ software (license required). The integrated web interface allows for location-independent, browser-based remote control of the system via a virtual front panel, enabling you to, for example, create scan lists or configure measurements.
Optimal application versatility through plug-in modules:
The broad and flexible functionality of the available plug-in modules optimizes the system’s applications and, consequently, the cost-effectiveness of the DAQ970A data acquisition system. Up to three identical or different modules can be inserted into the device in any combination, configuring it as a compact data logger, a full-featured measurement data acquisition system, or a cost-effective switching unit. The integrated digital multimeter is controlled via the DAQM900A, DAQM901A, DAQM902A, and DAQM908A modules.
- DAQM900A: 20-channel solid-state multiplexer + 2 current measurement channels, 450 channels/s, 120 V / 0.02 A
- DAQM901A: 20-channel multiplexer (2/4-wire) + 2 current measurement channels, 80 channels/s, 300 V / 1 A
- DAQM902A: 16-channel multiplexer (2/4-wire), 250 channels/s, 300 V / 50 mA
- DAQM903A: 20-channel universal relay module, 120 channels/s, 300 V / 1 A
- DAQM904A: 4 x 8 matrix switch module, 120 channels/s, 300 V / 1 A, supports up to 96 signal combinations
- DAQM905A: Dual 4-channel RF multiplexer, 50 Ω, 2 GHz bandwidth, 60 channels/s, 42 V / 0.7 A
- DAQM907A: Multifunction module, two 8-bit digital inputs/outputs (42 V / 400 mA), 26-bit event counter (42 V / 100 kHz), two 16-bit analog outputs (±12 V / 10 mA)
- DAQM908A: 40-channel multiplexer module, 80 channels/s, 300 V / 1 A
- DAQM909A: Digitizer Module, 4-channel, 800k samples/s, 24-bit
Note:
The Keysight DAQ973A is the official successor to the discontinued Keysight 34970A data logger.
Please note: Special-stock items may show signs of use. Subject to prior sale. The configuration of a special-stock item cannot be changed. The calibration of a special-stock item may no longer be current. If you would like a current calibration, please feel free to contact our experts.
Give us a call— we’d be happy to advise you personally:
+49 (0)7121 / 51 50 50