HUBERT A1230-01 | 4-quad. Voltage amplifier, DC - 7 MHz, 380 V / μs, 185 W source, 68 W sink (12300010)

Manufacturer number: 12300010

HUBERT A1230-01 | 4-quadrant NF power amplifier, DC - 7 MHz, 380 V / µs, 75 Vpeak, ± 5 Apeak, 185 W source, 68 W sink.

  • Output voltage: ± 75 Vpeak
  • Output current: ± 5 apeak
  • Power bandwidth: DC - 1 MHz
  • Frequency range: DC - 7 MHz (Small signal -3 dB)
  • Output power: 185 W (source), 68 W (sink)
  • Max rate of increase: 380 V / μs
  • Voltage amplification: Two addable inputs with 50 Ω and 100 kΩ input resistance
    20 ± 1% (± 100 ppm / ° C) 50 Ohm input
    10 ± 1% (± 100 ppm / ° C) input 100 kOhm
  • Offset: ± 2 mV typ. (± 0.1 mV / ° C)
  • Universally applicable, broadband laboratory amplifier; ideal as an "afterburner" for function generators.
  • Amplifier is stable with all inductive and capacitive loads.
  • Preamplifier output (bridge out) enables simple construction of a bridge circuit to double the output voltage.
  • 2 supply voltages for ideal load adjustment.
  • USB port (emulated COM port) as standard
  • Dimensions: (W x H x D) 449 x 133 x 435.5 mm
  • Weight: 14 kg

Applications:

  • General laboratory applications in research, development and test field
  • EMC tests
  • Material testing
  • MRI
  • Component tests
  • Voice coil drives
  • Piezo control
  • Magnetic field generation (e.g. with Helmholtz coils)
  • Medical technology
  • Laser technology
  • Plasma technology

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Detaildescription

A1230-01 | 4-quad. Voltage amplifier, DC - 7 MHz, 380 V / μs, 185 W source, 68 W sink (12300010)

The A1230-01 is a linear, broadband precision power amplifier. It is predestined for all applications that require rapidly changing signals at any ohmic and complex loads.

The A1230-01 has two addable inputs with 50 Ω and 100 kΩ input resistance; the 50 Ω input makes it the ideal "afterburner" for standard function generators.

There are two selectable operating voltages for high-voltage / low-current or low-voltage / high-current applications. Especially with very low-resistance loads, the selection of the low operating voltage leads to a considerable reduction in the power loss and a higher output current.

If higher output voltages are required, the preamplifier output (bridge out) enables simple construction of a bridge circuit with a second A1230-01 to double the output voltage.

The device is equipped with a quiet, temperature-controlled fan. In addition to an overtemperature shutdown, a power loss calculation and fast current monitoring ensure perfect short-circuit and overload protection.

It is operated using the controls on the front panel of the amplifier. In addition, the amplifier can be completely remote controlled via the USB interface using a simple byte protocol.

If higher output voltages or higher output currents are required, configurations with series or parallel connections of several A1230-01 are possible.

Accessoires (6 products )

Accessoires (6 products )

Rohde&Schwarz HMF2525
Function generator, 1-channel 25MHz, 10Vss, arbitrary, USB, RS232 (3593.0616.02)

Delivery time upon request

€2,070.00
GW Instek AFG-3021
Function generator, 1-channel 20 MHz, 10Vpp, arbitrary, USB, LAN

Delivery time upon request

€1,350.00
GW Instek AFG-2012
Function generator, 1-channel 12 MHz, 10Vpp, arbitrary, USB

Delivery time upon request

€295.00
GW Instek AFG-3081
Function generator, 1-channel 80 MHz, 10Vpp, arbitrary, USB, RS232, GPIB

Delivery time upon request

€2,700.00
Serie
Keysight 33521B
Function generator, 1-channel 30MHz, 10Vss, arbitrary, Trueform, USB, LAN, GPIB

Delivery time upon request

€2,552.40 €2,836.00
Serie
Keysight 33511B
Function generator, 1-channel 20MHz, 10Vss, arbitrary, Trueform, USB, LAN, GPIB

3 in stock. Ready to ship in 1 business day

€2,322.00 €2,580.00

About the Manufacturer

HUBERT
Dr. Hubert's portfolio includes power amplifiers, EMC interference generators, coupling networks for EMC testing and general laboratory applications. Dr. Hubert's products are manufactured in Germany and can also be modified in small quantities for special applications upon customer request.

In close cooperation with the University of Applied Sciences Bochum, Dr. Hubert combines future-oriented research and industrial application at the Technology Center Ruhr (TZR).

Last Seen Products

Product added to compare
Product Compare added Product Compare