#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
Without reliable communication, safe operation is impossible. In the aerospace industry, failures are not an option. At ...
In safety-critical development and manufacturing processes, the test architecture determines quality, cost efficiency, a...
Increasing efficiency requirements in vehicles, data centers, and industry are driving new vehicle electrical system and...
Early prevention, comprehensive certification, targeted troubleshooting. In every area of your data center, measuring in...
Manufacturer number: GDM-8341
| 2-/4-wire: | 2-/4 |
|---|---|
| Accuracy voltage measurement AC: | 0,5 % |
| Accuracy voltage measurement DC: | 0,02 % |
| Article number: | 01DM834100GS |
| Capacity measuring range: | 5 nF - 50 µF |
| Current measuring range AC: | 500 µA - 10 A |
| Current measuring range DC: | 500 µA - 10 A |
| Dimensions (L x W x H) (mm): | 302 x 265 x 107 |
| Diode test / continuity test: | Yes / Yes |
| Display: | VFD, dual, numeric |
| Frequency measuring range: | 10 Hz - 1 MHz |
| Interfaces: | USB |
| Measurements per second: | 40 |
| Model: | GDM-8341 |
| Number of positions: | 4.5 |
| Resistance measuring range: | 500 Ω - 50 MΩ |
| Special features: | without GPIB, dual measurements |
| Temperature measurement: | No |
| Voltage measuring range AC: | 500 mV - 750 V |
| Warranty (years): | 2 |
| Weight (kg): | 4 |
| max. Measuring range DC (V): | 1,000 |
| min. Measuring range DC (mV): | 500 |
Please Note: This device is currently delivered without GPIB interface.
The 4½-digit (corresponds to 50,000 counts) digital multimeter, equipped with a vacuum fluorescence display, offers a basic accuracy of 0.02% for DC voltage measurements. The measured data can be transferred to a PC via the integrated "USB interface".
In addition to the usual measurement functions, this device can also measure capacitance . In addition, the device offers other helpful measurement functions that are required again and again in the production environment, in the laboratory or during training. The device can be controlled by a computer via the USB interface and the measurement data can be transferred.