The SINEAX AM3000 from Camille Bauer Metrawatt is a high-precision, multifunctional high-current meter designed for panel mounting. The device was developed for the comprehensive measurement, analysis, and monitoring of electrical parameters in high-current networks. With its high-resolution 5-inch TFT color display, intuitive menu navigation, and extensive analysis functions, it offers a powerful solution for the reliable monitoring and optimization of electrical power supply systems.
This universal measurement system supports various grid configurations, ranging from single-phase grids to unbalanced four-wire grids. It measures key electrical parameters such as voltage, current, active, reactive, and apparent power, power factor, frequency, as well as active and reactive energy. Additional functions for harmonic analysis, unbalance monitoring, and energy balance analysis enable a detailed assessment of the power system’s condition. This allows for the early detection of unusual loads, power system disturbances, and potential energy losses.
The SINEAX AM3000 is particularly well-suited for use in industrial production facilities, power distribution systems, switchgear, and building automation. Typical applications include continuous grid monitoring, energy management, the analysis of load profiles and energy consumption, and grid quality control. In addition, the device supports fault diagnosis, connection checks, and the monitoring of electrical equipment.
Thanks to its integrated Ethernet and RS485 interfaces, the meter can be integrated into existing automation and control systems. The Modbus/TCP and Modbus/RTU communication protocols enable reliable transmission of the recorded measurement values. The integrated web server allows for convenient access to measurement data and the ability to configure device settings without additional software.
The device model with part number 192881 features an integrated data logger for recording periodic measurement data and events. This allows electrical operating conditions to be documented over extended periods and subsequently evaluated. The recording of energy and load profile data supports the analysis of consumption trends, the identification of load peaks, and the assessment of energy efficiency. In addition, event logging enables a targeted investigation of unusual or critical operating conditions.
Another special feature of this model is two integrated relay outputs with changeover contacts. These can be used to signal alarm conditions and to control external signaling or control devices. In conjunction with the freely configurable monitoring functions, it is possible, for example, to automatically report limit violations, unusual grid conditions, or other relevant operating conditions.
The combination of precise power grid monitoring, integrated data logging, and additional relay outputs makes the SINEAX AM3000 (part number 192881) particularly well-suited for demanding power distribution and monitoring applications. While the data logger enables retrospective analysis of electrical events, the relay outputs support immediate responses to defined operating conditions. As a result, the device provides a versatile foundation for reliable energy management and continuous system monitoring.
Product Features:
- Manufacturer: Camille Bauer Metrawatt AG
- Product Series: SINEAX AM
- Model: SINEAX AM3000
- Part Number: 192881
- Device Type: Multifunctional power monitoring meter with data logger and relay outputs
- Mounting Type: Panel mounting
- Front Dimensions: 144 × 144 mm
- Mounting Depth: 65.2 mm
- Display: 5.0-inch TFT color display
- Display resolution: 800 × 480 pixels
- Voltage and current inputs: 4 voltage channels and 4 current channels
- Rated current: 1 to 5 A, maximum 7.5 A
- Current overload capacity: 10 A continuous
- Rated voltage: 57.7 to 400 V (phase-to-neutral), 100 to 693 V (phase-to-phase)
- Rated frequency: 50/60 Hz, measurement ranges 42 to 58 Hz and 50.5 to 69.5 Hz
- Sampling rate: 18 kHz
- Measurement accuracy for voltage and current: ±0.1%
- Measurement accuracy for power: ±0.2%
- Frequency measurement accuracy: ±0.01 Hz
- Active energy: Accuracy class 0.2S according to IEC 62053-22
- Reactive energy: Accuracy class 0.5S according to IEC 62053-24
- Harmonic analysis: Up to the 50th harmonics according to IEC 61000-4-7
- Measurement functions: Voltage, current, power, frequency, energy, unbalance, and harmonic analysis
- Monitoring functions: 12 limit values, 8 monitoring functions, and 1 collective alarm
- Operating hour counters: 3 freely configurable operating hour counters and a device hour counter
- Communication interfaces: Ethernet (RJ45) and RS485
- Communication protocols: Modbus/TCP, Modbus/RTU, HTTP, HTTPS, NTP, IPv4, and IPv6
- Ethernet transmission: 10/100 Mbit/s
- Digital inputs and outputs: 1 passive digital input and 2 passive digital outputs
- Additional relay outputs: 2 relays with changeover contacts
- Relay rating: 250 V AC / 2 A or 30 V DC / 2 A
- Relay functions: Configurable alarm and switching functions
- Data logger: Integrated
- Data logger functions: Recording of periodic measurement data and events
- Recording interval: Configurable from 10 seconds to 1 hour
- Recordable data: Energy and load profile data as well as event information
- Storage medium: microSD memory card, at least 16 GB
- Data export: CSV export via web interface or REST interface
- Automated data export: Possible via SFTP
- Power supply: 110 to 230 V AC / 130 to 230 V DC
- Power consumption: Maximum 30 VA or 13 W
- Operating temperature: -10 to +55 °C (without UPS)
- Relative humidity: Less than 95%, non-condensing
- Maximum operating altitude: 2,000 m above sea level
- Protection rating: IP54 on the front, IP30 for the housing, IP20 for the terminal blocks
- Protection class: II (insulated)
- Measurement category: Voltage 600 V CAT III, current 300 V CAT III
- Housing material: Polycarbonate (Makrolon)
- Weight: Approx. 800 g
