The SINEAX AM1000 from Camille Bauer is a multifunctional high-current meter designed for panel mounting and developed for the precise measurement, analysis, and monitoring of electrical networks. With its compact 96 x 96 mm mounting format, a high-resolution 3.5-inch TFT color display, and intuitive menu navigation, it provides a clear overview of key electrical parameters.
The meter is suitable for universal use in industrial facilities, building automation, and electrical power distribution. Thanks to its flexible measurement inputs, it supports various network configurations, ranging from single-phase networks to unevenly loaded three- and four-wire networks. Among other things, it measures voltages, currents, active, reactive, and apparent power, power factors, frequencies, and energy values.
The SINEAX AM1000 offers numerous analysis functions for comprehensive power system monitoring. These include harmonic analysis up to the 50th harmonic, unbalance analysis, energy balancing, and graphical display of voltage and current waveforms. An integrated vector diagram simplifies phase sequence verification and enables the rapid detection of faulty connections.
The model with part number 192729 also features a two-channel fault current detection system for monitoring differential and ground conductor currents in grounded electrical networks. Each measurement channel supports two measurement ranges, enabling the detection of various fault current conditions. Continuous monitoring allows for the early detection of insulation faults, unwanted leakage currents, and critical changes in the system’s condition. This supports condition-based maintenance and helps increase operational safety and system availability.
The integrated monitoring and alarm functions enable targeted evaluation of the recorded measurement values. Individually configurable thresholds and logical conditions allow critical operating conditions to be detected and corresponding alarm messages to be triggered. Residual current monitoring is particularly suitable for industrial power distribution systems, electrical switchgear, and building installations where continuous monitoring of electrical insulation and leakage currents is required.
Ethernet and RS485 communication interfaces are available for integration into higher-level automation and energy management systems. Modbus/TCP and Modbus/RTU, among others, are supported. Measurement data can be retrieved and device settings adjusted via the integrated web interface without the need for additional software. Security features such as role-based access control (RBAC), HTTPS, and audit logging support secure operation in networked systems.
The SINEAX AM1000, with part number 192729, is thus a powerful solution for the continuous monitoring of electrical power distribution systems, the analysis of power quality, optimizing energy consumption, and the early detection of fault currents and residual currents. The combination of precise power measurement technology and integrated residual current monitoring enables comprehensive condition monitoring of electrical systems.
Product Features:
- Manufacturer: Camille Bauer Metrawatt AG
- Product Series: SINEAX AM
- Model: SINEAX AM1000
- Part Number: 192729
- Device Type: Multifunctional high-current and power monitoring meter with residual current detection
- Mounting type: Panel mounting
- Front dimensions: 96 x 96 mm
- Mounting depth: 85 mm
- Panel cutout: 92 x 92 mm
- Display: 3.5-inch TFT color display
- Display resolution: 320 x 240 pixels
- Voltage measurement channels: 3
- Current measurement channels: 3 current transformer inputs
- Rated current: 1 to 5 A
- Maximum measurement current: 7.5 A
- Current overload capacity: 10 A continuous; 100 A for 1 s, five times at 300-second intervals
- Rated voltage: 57.7 to 400 V (L-N), 100 to 693 V (L-L)
- Maximum input voltage: 480 V (L-N), 832 V (L-L)
- Rated frequency range: 42 to 58 Hz or 50.5 to 69.5 Hz
- Sampling rate: 18 kHz
- Measurement interval: 10/12 periods at 50/60 Hz; alternatively 1/2 period
- Measurement accuracy for voltage and current: ±0.2%
- Measurement accuracy for power: ±0.5%
- Frequency measurement accuracy: ±0.01 Hz
- Active energy accuracy: Class 0.5S according to IEC 62053-22
- Reactive energy accuracy: Class 0.5S according to IEC 62053-24
- Harmonic analysis: Up to the 50th harmonics according to IEC 61000-4-7
- Power system analysis: Voltage and current measurement, power analysis, unbalance analysis, reactive power analysis, energy balancing, THD and TDD analysis
- Monitoring functions: 12 limit values, 8 monitoring functions (each with 3 inputs), 1 collective alarm
- Operating hour counters: 1 device counter and 3 freely configurable operating hour counters
- Communication interfaces: Ethernet and RS485
- Ethernet connection: RJ45, 10/100 Mbit/s
- Communication protocols: Modbus/TCP, Modbus/RTU, HTTP, HTTPS, NTP, IPv4, and IPv6
- Web server: Integrated, for configuration and display of measured values
- Standard I/Os: 1 digital output and 1 digital input/output, passive
- Fault current detection: Integrated two-channel residual current and neutral current monitoring (RCM)
- Number of fault current measurement channels: 2, each with 2 measurement ranges
- Measurement range 1: Earth conductor current measurement, 1 A
- Current transformer ratio for measurement range 1: 1/1 to 1/1000 A
- Response threshold for measurement range 1: 30 mA to 1,000 A
- Measurement range 2: Residual current measurement, 2 mA, with connection monitoring
- Current transformer ratio, Measurement Range 2: Differential current transformer 500/1 to 1,000/1 A
- Response threshold, Measurement Range 2: 30 mA to 1 A
- Residual current monitoring functions: Residual current monitoring, neutral conductor current monitoring, and connection monitoring of the residual current transformers
- Scope of application for residual current monitoring: Grounded electrical systems
- Data logger: Includes periodic data recording and event logging
- Power supply: 100 to 230 V AC/DC
- Power consumption: Maximum 18 VA or 8 W
- Operating temperature: -10 to +55 °C
- Storage temperature: -25 to +70 °C
- Relative humidity: Less than 95%, non-condensing
- Maximum operating altitude: 2,000 m above sea level
- Protection rating: IP54 (front), IP30 (housing), IP20 (terminals)
- Protection class: II (insulated)
- Measurement category: Voltage 600 V CAT III, Current 300 V CAT III
- Housing material: Polycarbonate (Makrolon)
- Flammability class: UL94 V-0
- Weight: Approx. 400 g
- Applications: Indoor use, industrial power distribution, building automation, energy management, grid monitoring, and fault current and residual current monitoring in grounded electrical systems
