The GT-900-D FTT KIT combines the device tester GT-900 and the "TruTest" software. The KIT thus supports you in tests and the verification of test objects through the high user-friendliness of the individual components.
Beha-Amprobe GT-900
The device tester Beha Amprobe GT-900 enables you to carry out tests according to DIN VDE 0701-0702 and DGUV regulation 3 (BGV A3). The VDE test device has a database in the test device (bi-directional) as well as automatic and pre-installed test processes.
The operation of the GT 900 is simple and uncomplicated, using a rotary switch and START/STOP button. The automatic start and save function for the protective conductor resistance test allows you to take two-handed measurements on measurement objects that are difficult to access.
The integrated measured value memory is sufficient for approx. 5,000 device measurements/test items and has three memory levels (customer, location, department). The appliance tester GT-900 has USB connections and is HID compatible.
Measurement functions:
- visual inspection
- Protective conductor resistance measurement (RPE)
- Insulation resistance measurement (RISO)
- Equivalent leakage current measurement (IEA)
- Protective conductor current measurement (IPE Δ)
- Touch current measurement (IB)
- Functional test (P/IL) Apparent power (VA), active power (P), mains voltage at the test item (U), current consumption (load current) (IL), power factor (cos φ)
- Current measurement via external
- Direct testing of cold/hot device leads
- Testing of extension cords, multiple sockets and cable reels
- Automatic testing of portable RCDs
- Measurement of protective extra-low voltage (SELV/PELV)
- Automatic test sequence (AUTO TEST)
Product features:
- Simple operation via rotary switch and START/STOP button
- Database in the test device, test information (attributes) available for each test item
- Test current for protective conductor resistance 5 A and 0.2 A (AC)
- Residual current measurement method for protective conductor current
- Direct measurement method for touch current
- Fast safety and functional testing of cold device cables
- Suitable for technically instructed people, clear good/bad statement function
- Connection for barcode scanner for reading in test item numbers
- Automatic test procedure (AUTO TEST), also with input of customer-specific test procedures. The customer-specific test sequences can be saved on a USB stick and copied from test device to test device.
- Connection for external current clamp adapter for measuring protective conductor currents and load currents, also on 3-phase test objects.
- Testing of portable residual current circuit breakers (PRCD, PRCD-S, PRCD-S+, PRCD-K). During this test, upstream RCD/Fi are not triggered.
- Test voltage for insulation measurement switchable 250/500 V
- Automatic polarity reversal of the mains socket
The Beha-Amprobe GT-900 offers a database integrated in the test device, a measured value memory for approx. 5000 test items and three memory levels (customer, location and department). Operation with the START/STOP button and the rotary switch impresses with its user-friendly and simple design.
Software TruTest
Fluke TrueTest software simplifies data management and reporting for device testing over traditional methods. Whether you're testing equipment in an office, checking repairs in a workshop, or performing proof tests, proper data management is essential to generate reports that are easy for the customer to understand.
