#statusMessage#

Do you want to start the compare now?

Teledyne FLIR EV45-T2 | Charging station and wallbox tester with type 2 plug and type 1 converter

Manufacturer number: EV45-T2

Teledyne Flir EV45-T2 | charging station and wallbox tester with type 2 plug and type 1 converter.

Product features:

  • CP Error (E state) Simulation: Pass/Fault (CP signal shorted to PE)
  • CP State Simulation: A (disconnected), B (connected), C (charging), D (charging with ventilation), E (error)
  • Input type: Measuring terminals: L1, L2, L3, N, PE Output for test purposes only: Max. Number 250 V (single-phase) / 430 V (3-phase), 50 / 60 Hz, CAT II 300 V, Max. 10 A
  • PE Error Simulation: Pass/Fault (interruption of the PE conductor)
  • PE Pre-Test: Pass/Fault (> 50 V AC/DC between PE conductor and touch sensor)
  • PP State Simulation: Open, 13 A, 20 A, 32 A, 63 A
  • RCD/CCID Trip Test: Pass/Fault (test RCD/CCID activation after tripping)
  • Voltage Phase Indication: L1, L2, L3
  • Output: (Optional) DM286: CP status C/D for AC voltage with Hz measurement, (optional) IM75-2: CP status B for insulation testing of EV cables
  • Connector types: T2 (built-in), type 1 (with converter)
  • Battery life: Approx. 100 hours with alkaline batteries
  • Battery type: 4 AA alkaline batteries

Documents & Downloads

Description

EV45-T2 | Charging station and wallbox tester with type 2 plug and type 1 converter

The FLIR EV45-T2 test adapter for electric vehicle charging stations is equipped with an integrated type 2 plug according to IEC 62196-2 and is therefore ideally suited for type 2 charging stations or AC wall outlets. Specially designed for AC charging stations of levels 1 and 2 (EVSE), it can be used in both private and commercial environments.

With the EV45-T2, you can comprehensively test the safety of your charging infrastructure: Test the protective earth conductor (PE), check the electrical wiring and check the function of the current interruption device (CCID) to ensure electrical safety. In addition, you can measure the maximum current output of the charger as well as the output voltage and frequency for further performance and safety analysis.

In combination with the FLIR DM286 IGM multimeter, a comprehensive test solution is created. Thanks to integrated Bluetooth FLIR Meterlink technology, you can send measurement data wirelessly to the Meterlink app on your mobile device. Ideal for immediate documentation, evaluation and sharing of results.

News and Knowledge

Measurement Tip

The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...

10/01/2023
Reading time 7 Min.
1977
3
Applications & Articles

Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....

08/03/2022
Reading time 4 Min.
454
1

About the Manufacturer

Teledyne FLIR
Teledyne FLIR is the world's largest manufacturer of thermal imaging cameras and thermographic instruments. Teledyne FLIR covers an incredibly wide range and has the optimal thermal imaging camera for every application, whether construction, research and development or industrial manufacturing. Since 2010 dataTec is Platinum Distributor of FLIR and, of course, now of Teledyne FLIR.

Last Seen Products