Schwarzbeck NSLK8163RC | V-line simulation (Line Impedance Stabilization Network / LISN), CISPR, remotely controllable

Manufacturer number: NSLK8163RC

Schwarzbeck NSLK8163RC | V-network simulation (Line Impedance Stabilization Network / LISN) NSLK, remotely controllable, for interference voltage measurements according to VDE-, CISPR- et al., 9 kHz - 30 MHz, 4 x 63 A, CEE connector

  • Frequency range: 9 kHz - 30 MHz
  • Simulation impedance: (50 μH + 5 Ω) || 50 Ω
  • Prefilter choke: 250 μH
  • Maximum continuous operating current CEE: 4x 63 A
  • Maximum voltage: 400/700 VAC 630 VDC
  • Standard: CISPR 16-1-2
  • Power cord: CEE plug, hardwired CEE plug (IEC 60309)
  • Test device connection: CEE socket
  • Weight: 40.8 kg
  • Dimensions (housing including sockets WxHxD): 450 mm x 480 mm x 650 mm
  • Connection earthing front plate: 8 mm screw terminal, can be unscrewed
  • Connection for "artificial hand": 4 mm socket with M6 screw terminal, cannot be unscrewed
  • Connection for measuring receiver: BNC socket, 50 Ω

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Detaildescription

NSLK8163RC | V-line simulation (Line Impedance Stabilization Network / LISN), CISPR, remotely controllable

The Schwarzbeck NSLK8163RC network replica has the task of supplying the device under test with the operating current, forwarding the interference voltage at its terminals to the radio interference measuring receiver and loading the radio frequency emitted by the device under test with a standardized impedance. The NSLK 8163 RC is equipped with a 250 μH pre-choke as well as a 50 μH main choke connected in series for each path. The pre-choke ensures excellent decoupling from the feed network, even at 9 kHz.

V network simulations of the NSLK series are required for interference voltage measurements according to VDE, CISPR and related standards. They supply the test object with mains voltage, reduce external interference voltages present in the mains and offer the test object a standardized impedance of 50 Ω || (50 μH + 5 Ω). The interference voltage present at the terminals of the device under test is fed to the radio interference measuring receiver via a high-pass filter with a 7 kHz cut-off frequency (for attenuation of low-frequency interference and mains harmonic components).

Alternate products (1 products )

Alternate products (1 product )

Schwarzbeck NSLK8163
Line Impedance Stabilization Network (LISN), CISPR 16-1-2

Delivery time upon request

On Request

About the Manufacturer

Schwarzbeck
Schwarzbeck is an internationally active manufacturer of measuring electronics, with a focus on the development and production of EMC measuring technology.

Last Seen Products

Product added to compare
Product Compare added Product Compare