Schwarzbeck NNBM8124BNC400 Line Impedance Stabilization Network / LISN

Manufacturer number: NNBM8124BNC400

Schwarzbeck NNBM8124BNC400 | Vehicle electrical system simulation (Line Impedance Stabilization Network / LISN) 250 A.

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Detaildescription

NNBM8124BNC400 Line Impedance Stabilization Network / LISN

The asymmetrical, single-pole on-board electrical system simulation NNBM 8124-400 can be used to measure the interference voltage in the HF-VHF range from 0.1 MHz to approx. 150 MHz on on-board electrical systems (e.g. cars, aircraft, ships) or for BCI tests. Transient measurements according to ISO 7637-2 are also possible. The simulation impedance corresponds to the requirements of CISPR 16-1-2 and CISPR 25 with (5μH + 1 Ohm) || 50 ohms.

The permissible continuous current consumption of the device under test is 250 A. For a short time, over 500 A can be drawn. This makes this model particularly interesting for the areas of electrical energy storage, electromobility and hybrid drives.

The high dielectric strength underlines this. If currents> 250 A are to be removed permanently, this can be achieved by external ventilation. The device under test is connected to the wing clamps on the front panel. The feeding takes place on the back.

About the Manufacturer

Schwarzbeck
Schwarzbeck is an internationally active manufacturer of measuring electronics, with a focus on the development and production of EMC measuring technology.

Last Seen Products

Product added to compare
Product Compare added Product Compare