#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
Without reliable communication, safe operation is impossible. In the aerospace industry, failures are not an option. At ...
In safety-critical development and manufacturing processes, the test architecture determines quality, cost efficiency, a...
Increasing efficiency requirements in vehicles, data centers, and industry are driving new vehicle electrical system and...
Early prevention, comprehensive certification, targeted troubleshooting. In every area of your data center, measuring in...
Manufacturer number: GPM-8310
| Article number: | 01PM831000GT |
|---|---|
| Dimensions (L x W x H) (mm): | 379 x 268 x 107 |
| Display: | 5" TFT LCD |
| Displayable measurement parameters: | Vdc, Vrms, V+pk, V-pk, Idc, Irms, I+pk, I-pk, P, P+pk, P-pk, VA, VAR, CFV, CFI, PF, VHz, Ihz, DEG, THDV, THDI, WP, WP+, WP-, q, q+, q- |
| Frequency range: | DC, 0.1 Hz - 100 kHz |
| Input resistance: | A: 5 mΩ / 500 mΩ; V: 2 MΩ |
| Interfaces: | USB, LAN, RS-232-C |
| Model: | GPM-8310 |
| Number of channels: | 1 |
| Samplerate: | 300 kHz |
| Special features: | THD measurement |
| Supported standards: | IEC61000-4-7, IEC62301 |
| Warranty (years): | 1 |
| Weight (kg): | 3 |
| max. Power (A): | 20 |
The GW Instek GPM-8310 is a digital power analyzer (power meter) for single-phase measurements up to 600 V and 20 A for DC and AC from 0.1 Hz - 100 kHz. The 16-bit analogue to digital (A/D) converter offers high vertical resolution and operates at a 300 kHz sampling rate for signal-accurate acquisition.
Considering the diverse functions of this GW-Instek power meter, the GPM-8310 offers excellent value for money.
The power meter has a 5-inch TFT-LCD screen with a five-digit measured value display, offers 25 power measurement parameters and has high-precision measurement technology.
The GPM 8310 analyzer has the ability to display the waveform (voltage / current / power), the integration measurement function, harmonics measurement and analysis of any order (meets the requirements of IEC 61000-4-7 for harmonics measurements at 50/60 Hz), external Sensor input connectors and various communication interfaces.
Note: The GW Instek GPM-8013 Power Meter is optionally available with a Digital I/O / DA4 interface. This must be installed at the factory and cannot be retrofitted. Request an offer or call us: 07121 / 51 50 50 . We are happy to help.
General mode: 2 main test items + 8 secondary test items
Simple mode: displays the test scores of 4 main test items