#statusMessage#
Do you want to start the compare now?
#statusMessage#
Do you want to start the compare now?
Our electromagnetic environment is heavily burdened due to the multitude of transmitters and sources of interference pre...
Automated test and measurement systems that are fully connected with instrumentation and test data can significantly inc...
Temperature is one of the most common risk factors in industry. Overheating can disrupt processes, reduce quality or cau...
Electric vehicles are the future - but what happens to the batteries when they can no longer be used in cars? Efficient ...
Manufacturer number: M507A
All-current sensitive RCDs type B, B+: | No |
---|---|
Article number: | M507A |
Automatic test sequence: | No |
Check residual voltage: | No |
Counter start-up: | No |
DIN VDE 0100 / IEC 60364-6: | No |
Dimensions (L x W x H) (mm): | 260 x 70 x 40 |
Insulation measurement 50V: | No |
Insulation measurement 100V: | No |
Insulation measurement 250V: | No |
Insulation measurement 325V: | No |
Insulation measurement 500V: | No |
Insulation measurement 1000V: | No |
Interfaces: | No |
Measured value memory: | No |
Mobile: | Yes |
Model: | GMC Metraline Zcheck |
Rotating field direction: | No |
Selective, SRCDs, PRCDs, type G/R: | No |
Software included: | No |
Stationary: | No |
Touch Display: | No |
Voltage drop: | No |
Weight (kg): | 0.36 |
e-Mobility (prepared): | No |
The test device is used to measure fault loop impedances and network impedances.
The measuring range from 0 to 200 Ω (0.27 Ω to 200 Ω according to VDE 0413 / EN 61557) enables a short-circuit current calculation from 0 to 23 kA.
The METRALINE Z-CHECK enables the following measurements:
The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...
Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....