#statusMessage#
Do you want to start the comparison now?
#statusMessage#
Do you want to start the comparison now?
Without reliable communication, safe operation is impossible. In the aerospace industry, failures are not an option. At ...
In safety-critical development and manufacturing processes, the test architecture determines quality, cost efficiency, a...
Increasing efficiency requirements in vehicles, data centers, and industry are driving new vehicle electrical system and...
Early prevention, comprehensive certification, targeted troubleshooting. In every area of your data center, measuring in...
Manufacturer number: M246S
| Analogue segment display: | Yes |
|---|---|
| Article number: | M246S |
| Backlight: | Yes |
| Basic precision: | 0,2 % |
| Capacity measuring range: | 30 nF - 300 µF |
| Current measuring range AC/DC: | 300µA - 1A / 300µA - 1A |
| Data memory / logger: | Yes / Yes |
| Dimensions (L x W x H) (mm): | 200 x 87 x 45 |
| Diode test / continuity test: | Yes / Yes |
| Display Hold / Auto-Hold: | Yes / Yes |
| Display resolution: | 3,100 |
| Electrical safety: | CAT II 600 V, CAT III 300 V |
| Frequency measuring range: | 300 Hz - 300 kHz |
| Interfaces: | None |
| Min. / Max. Recording: | Yes / Yes |
| Model: | Metrahit T-COM Plus |
| Number of positions: | 3.75 |
| Resistance measuring range: | 300 Ω - 30 MΩ |
| Special features: | including DakkS calibration certificate |
| Temperature measurement ( PT100 / Type K / Type J): | Pt100 / Pt1000 |
| True effective measurement TRMS: | Yes |
| Voltage measuring range AC/DC: | 300 mV - 600 V / 300 mV - 600 V |
| Warranty (years): | 3 |
| Weight (kg): | 0.98 |
The METRAHIT T-COM PLUS cable multimeter is a portable, robust and field-compatible measuring device.
It is used to carry out measurements to determine sources of error in cable systems. It measures all cable and system relevant parameters such as voltage, current, resistance, insulation and loop resistance, capacitance and cable length.
A single-wire interruption or contact with an unwired wire (capacitive asymmetry) can be recognized by changing the polarity with the fast logarithmic bar graph display.