Rohde&Schwarz ZNLE6-P2 | Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 6 GHz (1323.0012P02)

Name: ZNLE6-P2 | Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 6 GHz (1323.0012P02)
Brand: Rohde&Schwarz
SKU: 1323.0012P02
Availability: InStock

Manufacturer number: 1323.0012P02

Delivery time upon request

On Request

or choose one of the following options:

Request a quote Product inquiries Request education-price

Rohde & Schwarz 1323.0012P02 | ZNLE6-P2 packet network analyzer, vectorial, 2 port, 1 MHz - 6 GHz

Frequency range from 100 kHz to 6 GHz
Two-port vector network analyzer with a full S-parameter test set for bidirectional measurements on passive components
High dynamics up to 120 dB (typ.)
Measurement bandwidths from 1 Hz to 500 kHz
Fast measurements, i.e. 8.7 ms for 401 points (100 kHz IF bandwidth, 200 MHz span, correction off)
Compact dimensions (24 cm depth) and low weight (6 kg)
Standalone device with 10.1 "WXGA touchscreen
Windows 10 operating system

Technical Data

Warranty (years):	1
Weight (kg):	7

Description

ZNLE6-P2 | Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 6 GHz (1323.0012P02)

The user interface and the compact dimensions make the R&S ZNLE the ideal companion for VNA basic applications.

The R&S ZNLE is a two-port vector network analyzer for bidirectional measurements of the S parameters S11, S21, S12 and S22 on passive components. When ordering the R&S ZNLE, only three decisions have to be made:

Select frequency range
Decide if a GPIB interface is needed
Decide whether time domain analyzes or cable fault measurements should be carried out

The analyzer is available with a frequency range from 100 kHz to 3 GHz (R&S ZNLE3 with option R&S ZNLE-B100) or 100 kHz to 6 GHz (R&S ZNLE6 with option R&S ZNLE-B100). A controller for remote control of the R&S ZNLE can be connected to the optional GPIB interface.

As a standalone device, the R&S ZNLE does not need an external PC to configure the test setup. The measurement can begin immediately after switching on.

The measurement can begin immediately after switching on. The time domain analysis (R&S ZNL-K2) and cable fault measurement (R & S®ZNL-K3) options extend the R&S ZNLE with important functions for general test purposes.

Accessoires

Rohde&Schwarz
ZCAN

Calibration kit, 50 Ohm, Type-N, DC - 3 GHz, Open / Short, Load, Through (Type-N (f) (m)) (0800.8515.52)

Delivery time upon request

On Request

Rohde&Schwarz
ZV-Z191

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) to Type-N (m), length: 61 cm (1306.4507.24)

Delivery time upon request

On Request

Rohde&Schwarz
ZV-Z192

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) - 3.5 mm (m), length: 61 cm (1306.4513.24)

Delivery time upon request

On Request

Rohde&Schwarz
FPL1-Z1

Transport protection cover, for FPL1000 and ZNL/ZNLE (1323.1960.02)

Delivery time upon request

€160.00

Rohde&Schwarz
FPL1-Z2

Carrying case with transparent lid for FPL1000 and ZNL/ZNLE (1323.1977.02)

Delivery time upon request

€445.00

Rohde&Schwarz
FPL1-Z3

Chest strap, for FPL1000 and ZNL, for portable operation with optional battery pack (1323.1683.02)

Delivery time upon request

€110.00

Rohde&Schwarz
FPL1-Z6

Adapter, rack, 19 inch, for FPL1000 and ZNL/ZNLE (1323.1954.02)

Delivery time upon request

€220.00

Rohde&Schwarz
ZV-Z191

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) to Type-N (m), length: 91 cm (1306.4507.36)

Delivery time upon request

On Request

Rohde&Schwarz
ZV-Z192

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) - 3.5 mm (m), length: 91 cm (1306.4513.36)

Delivery time upon request

On Request

Rohde&Schwarz
ZNLE-B100

Extension of the lower frequency limit to 100 kHz (1303.9272.02)

Delivery time upon request

On Request

Rohde&Schwarz
ZNL-B19

Removable hard drive, for ZNL, pre-mounted on PC card, including analyzer firmware (1323.2938.02)

Delivery time upon request

On Request

Alternate products

Rohde&Schwarz
ZNLE3

Network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connector: type N (f) (1323.0012.53)

Delivery time upon request

On Request

Rohde&Schwarz
ZNLE6

Network analyzer, vectorial, 2 port, 1 MHz - 6 GHz, connector: type N (f) (1323.0012.56)

Delivery time upon request

On Request

Bundle

Rohde&Schwarz
ZNLE3-P1

Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 3 GHz (1323.0012P01)

Delivery time upon request

On Request

Recommendations

Rohde&Schwarz
VSE

Vector Signal Explorer Basic Software Basic Version (1345.1011.06)

Delivery time upon request

On Request

Rohde&Schwarz
VSE

Vector Signal Explorer Basic Software Enterprise Edition (1345.1105.06)

Delivery time upon request

On Request

Options

Rohde&Schwarz
FPL1-B10

Interface, GPIB, for FPL1000 / EPL1000 (1323.1890.02)

Delivery time upon request

€685.00

About the Manufacturer

Rohde&Schwarz

For more than 90 years, Rohde & Schwarz has been one of the most innovative and progressive companies in the fields of test and measurement, broadcasting and media technology, cyber security, secure communications, and radiomonitoring and radiolocation technology. In its traditional fields of activity, Rohde & Schwarz is one of the world's leading suppliers. As a manufacturer of mobile communications and EMC test and measurement equipment as well as broadcasting and measurement technology for digital terrestrial television, the Group is the world market leader.

Measurement Tip

Basics of network analysis.

Network analysis is used, for example, in stability tests, to characterize components or to measure the frequency respon...

03/08/2021

Reading time 11 Min.

2766

Rohde&Schwarz ZNLE6-P2 | Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 6 GHz (1323.0012P02)

Rohde & Schwarz 1323.0012P02 | ZNLE6-P2 packet network analyzer, vectorial, 2 port, 1 MHz - 6 GHz

Technical Data

Documents & Downloads

Description

ZNLE6-P2 | Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 6 GHz (1323.0012P02)

Accessoires

Alternate products

Recommendations

Options

About the Manufacturer

News and Knowledge

Last Seen Products