The SINEAX AM3000 from Camille Bauer Metrawatt is a high-precision, multifunctional high-voltage power meter designed for panel mounting. The device was developed for the comprehensive measurement, analysis, and monitoring of electrical parameters in high-current networks. With its high-resolution 5-inch TFT color display, intuitive menu navigation, and extensive analysis functions, it offers a powerful solution for the reliable monitoring of electrical power supply systems.
This universal measurement system supports various grid configurations, ranging from single-phase grids to unbalanced four-wire grids. It measures key electrical parameters such as voltage, current, active, reactive, and apparent power, power factor, frequency, as well as active and reactive energy. Additional functions for harmonic analysis, unbalance monitoring, and energy balance analysis enable a detailed assessment of the power system’s condition. This allows for the early detection of unusual loads, power system disturbances, and potential energy losses.
The SINEAX AM3000 is particularly well-suited for use in industrial production facilities, power distribution systems, switchgear, and building automation. Typical applications include continuous grid monitoring, energy management, the analysis of load profiles and energy consumption, and grid quality control. In addition, the device supports fault diagnosis, connection checks, and monitoring of electrical equipment.
Thanks to its integrated Ethernet and RS485 interfaces, the meter can be integrated into existing automation and control systems. The Modbus/TCP and Modbus/RTU communication protocols enable reliable transmission of the recorded measurement values. Via the integrated web server, measurement data can be conveniently retrieved and device settings adjusted without additional software.
The device model with part number 192873 also features four analog current outputs with a bipolar output range of ±20 mA, as well as an integrated PME (Power Monitoring Energy) wireless control unit. The analog outputs enable the continuous transmission of selected electrical measurement parameters to higher-level control, regulation, and monitoring systems. Thanks to their freely configurable characteristic curves, they can be flexibly adapted to different process requirements.
The integrated PME wireless control unit expands the meter into a centralized solution for wireless energy monitoring. Up to 33 PME wireless sensors with Rogowski coils can be used to measure a total of up to 100 additional currents. This allows for a detailed analysis of energy flows in low-voltage distribution systems, individual feeders, and loads without the need for extensive additional signal wiring. The wirelessly measured current, power, and energy values form the basis for transparent energy management, load flow monitoring, and the optimization of energy consumption.
The combination of precise grid monitoring, analog process outputs, and wireless PME technology makes the SINEAX AM3000 (part number 192873) particularly well-suited for demanding power distribution and automation applications. Comprehensive alarm functions and security mechanisms such as role-based access control (RBAC), encrypted HTTPS communication, and audit logging support reliable and secure plant operation.
Product Features:
- Manufacturer: Camille Bauer Metrawatt AG
- Product Series: SINEAX AM
- Model: SINEAX AM3000
- Part Number: 192873
- Device Type: Multifunctional power monitoring meter with analog outputs and PME wireless control unit
- Mounting type: Panel mounting
- Front dimensions: 144 × 144 mm
- Mounting depth: 65.2 mm
- Display: 5.0-inch TFT color display
- Display resolution: 800 × 480 pixels
- Voltage and current inputs: 4 voltage channels and 4 current channels
- Rated current: 1 to 5 A, maximum 7.5 A
- Current overload capacity: 10 A continuous
- Rated voltage: 57.7 to 400 V (phase-to-neutral), 100 to 693 V (phase-to-phase)
- Rated frequency: 50/60 Hz, measurement ranges 42 to 58 Hz and 50.5 to 69.5 Hz
- Sampling rate: 18 kHz
- Measurement accuracy for voltage and current: ±0.1%
- Measurement accuracy for power: ±0.2%
- Measurement accuracy for frequency: ±0.01 Hz
- Active energy: Accuracy class 0.2S according to IEC 62053-22
- Reactive energy: Accuracy class 0.5S per IEC 62053-24
- Harmonic analysis: Up to the 50th harmonics according to IEC 61000-4-7
- Measurement functions: Voltage, current, power, frequency, energy, unbalance, and harmonic analysis
- Monitoring functions: 12 limit values, 8 monitoring functions, and 1 collective alarm
- Operating hour counters: 3 freely configurable operating hour counters and a device hour counter
- Communication interfaces: Ethernet (RJ45) and RS485
- Communication protocols: Modbus/TCP, Modbus/RTU, HTTP, HTTPS, NTP, IPv4, and IPv6
- Ethernet transmission: 10/100 Mbit/s
- Digital inputs and outputs: 1 digital input and 2 digital outputs
- Analog outputs: 4 channels
- Analog output range: ±20 mA, bipolar (maximum ±24 mA)
- Accuracy of analog outputs: ±0.2% of 20 mA
- Maximum load on analog outputs: 500 Ω
- Linearization of analog outputs: Linear or with configurable inflection points
- Analog output functions: Transmission of measured values to control systems, process monitoring, and remote control
- PME wireless control center: Integrated, for wireless acquisition of additional current and energy values
- PME wireless sensors: Connection of up to 33 sensors
- Additional current measurements: Up to 100 currents via PME wireless sensors
- PME sensor technology: Rogowski coils with 3 or 4 measurement channels per sensor
- PME current measurement ranges: 250 A, 500 A, or 1,000 A, configurable
- PME wireless frequency: 2.4 GHz
- PME wireless range: Up to 10 m
- PME data encryption: AES-128
- PME measurement interval: 1 second
- PME sensor sampling rate: 6 kHz
- PME current measurement accuracy: ±0.5%
- PME energy measurement: Active and reactive energy, accuracy class 3
- PME measurement parameters: Current, THD, TDD, active, reactive, and apparent power, power factor, and cos φ
- PME data access: Modbus/RTU, Modbus/TCP, REST API, and CSV export
- PME sensor power supply: Battery with a runtime of up to 10 years or USB-C
- PME setup: Sensor registration via QR code
- Auxiliary power: 110 to 230 V AC / 130 to 230 V DC
- Power consumption: Maximum 30 VA or 13 W
- Operating temperature: -10 to +55 °C (without UPS)
- Relative humidity: Less than 95%, non-condensing
- Maximum operating altitude: 2,000 m above sea level
- Protection rating: IP54 on the front, IP30 for the housing, IP20 for the terminal blocks
- Protection class: II (insulated)
- Measurement category: Voltage 600 V CAT III, Current 300 V CAT III
- Housing material: Polycarbonate (Makrolon)
- Weight: Approx. 800 g
