The GT-900-D FTT KIT combines the device tester GT-900 and the software „TruTest“. The KIT therefore supports you with tests and the verification of test specimens thanks to the high user-friendliness of the individual components.
Beha Amprobe GT-900
The Beha Amprobe GT-900 appliance tester enables you to carry out tests in accordance with DIN VDE 0701 / VDE 0702 / OVE EN 50678 / EN 50699 and DGUV regulation 3 (BGV A3). The VDE test device has a database in the test device (bi-directional) as well as automatic and pre-installed test sequences.
The GT 900 is simple and straightforward to operate using the rotary switch and START/STOP button. The automatic start and memory function for protective conductor resistance testing allows you to take measurements on difficult-to-access test objects at both ends.
The integrated measured value memory is sufficient for approx. 5,000 device measurements/test pieces and has three memory levels (customer, location, department). The GT-900 device tester has USB ports and is HID compatible.
Measurement functions:
- visual inspection
- resistance to protective earth (RPE)
- insulation resistance measurement (RISO)
- replacement leakage current measurement (IEA)
- protected earth current measurement (IPE Δ)
- Excitation current measurement (IB)
- Functional test (P/IL) Apparent power (VA), active power (P), mains voltage at the test ring (U), current consumption (load current) (IL), power factor (cos φtesting of local residual current circuit breakers
- Measurement of safety extra-low voltage (SELV/PELV)
- Automatic test sequence (AUTO TEST)
Product features:
- Easy operation via rotary switch and START/STOP button
- Database in the test device, test information (attributes) available for each test wing;available
- Prüf current for protective conductor resistance 5 A and 0.2 A (AC)
- Differential current measuring method for protective conductor current
- Direct measuring method for touch current
- ;Fast safety and functional testing of cold conductors
-
- Suitable for technically instructed persons, clear pass/fail statement function
- Connection for barcode scanners
- Fast safety and functional testing of cold conductors;for barcode scanners to read in test numbers
- Automatic test sequence (AUTO TEST), also with input of customer-specific test sequences. The customer-specific test sequences can be saved on a USB stick and copied from test device to test device.
- Connection for external current clamp adapter for measurement of protective conductor currents and load currents, also on 3-phase test loads.
- Testing of local residual current circuit breakers (PRCD, PRCD-S, PRCD-S+, PRCD-K). Upstream RCD/Fi are not tripped during this test.
- Switchable test voltage for insulation measurement 250/500 V
- Automatic polarity reversal of the mains socket
The Beha-Amprobe GT-900 offers a database integrated in the test device, a measured value memory for approx. 5000 test samples and three memory levels (customer, location and department). Operation via the START/STOP button and the rotary switch impresses with its user-friendly and simple design.
TruTest software
The Fluke TrueTest software simplifies data management and report generation for device testing compared to conventional methods. Whether you are testing devices in an office, inspecting repairs in a workshop or performing repeat testing, proper data management is critical to producing easy-to-understand reports for the customer.
