The Beha Amprobe GT-900 appliance tester enables you to carry out tests in accordance with DIN VDE 0701 / VDE 0702 / OVE EN 50678 / EN 50699 and DGUV regulation 3 (BGV A3). The VDE test device has a database in the test device (bi-directional) as well as automatic and pre-installed test sequences.
The GT 900 is simple and straightforward to operate using the rotary switch and START/STOP button. The automatic start and memory function for protective conductor resistance testing allows you to take measurements on difficult-to-access test objects at both ends.
The integrated measured value memory is sufficient for approx. 5,000 device measurements/test pieces and has three memory levels (customer, location, department). The GT-900 device tester has USB ports and is HID compatible.
Measurement functions:
- visual inspection
- resistance to protective earth (RPE)
- insulation resistance measurement (RISO)
- replacement leakage current measurement (IEA)
- protected earth current measurement (IPE Δ)
- Excitation current measurement (IB)
- Functional test (P/IL) Apparent power (VA), active power (P), mains voltage at the test string (U), current consumption (load current) (IL), power factor (cos φtesting of local residual current circuit breakers
- Measurement of safety extra-low voltage (SELV/PELV)
- Automatic test sequence (AUTO TEST)
Product features:
- Easy operation via rotary switch and START/STOP button
- Database in the test device, test information (attributes) available for each test wing;available
- Prüf current for protective conductor resistance 5 A and 0.2 A (AC)
- Differential current measuring method for protective conductor current
- Direct measuring method for touch current
- ;Fast safety and function test of cold conductors
-
- Suitable for technically instructed persons, clear pass/fail statement function
- Connection for barcode scanners
- ;for barcode scanners to read in test numbers
- Automatic test sequence (AUTO TEST), also with input of customer-specific test sequences. The customer-specific test sequences can be saved on a USB stick and copied from test device to test device.
- Connection for external current clamp adapter for measurement of protective conductor currents and load currents, also on 3-phase test loads.
- Testing of local residual current circuit breakers (PRCD, PRCD-S, PRCD-S+, PRCD-K). During this test, upstream RCD/Fi are not tripped.
- Switchable test voltage for insulation measurement 250/500 V
- Automatic polarity reversal of the mains socket
