HT 2002225 | Smart-Test HT700 test device according to VDE 0701-0702 DGUV regulation 3

Manufacturer number: 2002225

HT SMART TEST HT700 | Test device for safety-related checking of AC consumers and extensions according to DIN VDE 0701-0702 / DGUV regulation 3.

  • Test according to DGUV regulation 3, DIN VDE 0701-0702
  • Voltage measurement SELV / PELV via probe: 0.0 V… 440.0 V AC / DC
  • Current measurement IL1 (optional current clamp): 0.00 A… 16.00 A (0.00 A… 40.00 A)
  • Power measurement: 0 W… 4,000 W || Standby || 0.000 W… 9.999 W (current max. 50 mA)
  • Test sequences: SKI active, SKII active, extension, permanent connection, SKI with pliers, individual measurements
  • Protective conductor resistance: 0.000… 4.000 || Test current 200 mA DC / open circuit voltage 10 V
  • Insulation resistance: 0.00 M… 20.00 M || Open circuit voltages 250 V, 500 V || Short-circuit current 1 mA
  • Integrated residual current switch-off: residual current> approx. 20 mA
  • Differential current according to DIN EN 61557-14 for the correct evaluation of the harmonics: 0.00 mA… 20.00 mA AC || optional current clamp 0.00 mA… 40.00 mA
  • Touch current: 0.000 mA… 4.000 mA
  • Mains voltage measurement: 200 V… 250 V AC
  • Automatic limit value setting (protective conductor, insulation)
  • Measurement of extension cables and devices with protective extra-low voltage
  • Testing of permanently connected devices possible
  • Two-pole measurement (low resistance, insulation, substitute leakage current, voltage)
  • Checking the mains connection for PE connection and automatic shutdown in the event of a dangerous fault current of the device under test
  • Standby measurement and lightning-fast polarity reversal
  • Leakage current and consumer current measurement with optional current clamp
  • Interface: Bluetooth
  • Mains connection: AC 230 V ± 10%, operating ambient temperature: 5 ° C… 40 ° C
  • DIN EN 61557-16 / EN 61010
  • DIN EN 61326
  • CAT II 300 V
  • IP 20, closed waterproof IP 67
  • Dimensions: 259 mm x 251 mm x 114 mm
  • Weight: approx. 1 kg

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Description

2002225 | Smart-Test HT700 test device according to VDE 0701-0702 DGUV regulation 3

The handy test device Smart-Test HT700 is used for testing after repairs and for retesting electrical work equipment with a connected load of up to 4 kW, extensions, permanently connected test specimens and via adapters for testing three-phase consumers.

The test sequences are carried out via an Android app on the smartphone (included in the scope of delivery), coupled with the test device via a Bluetooth connection. The test sequence is menu-driven with simple, graphic profile selection and animated images to illustrate the measuring principle. At the same time as the test, photos of the master data or the test can be taken by the smartphone camera. Barcodes for the identification of the test objects are also scanned by the smartphone camera or by a separate barcode reader, which is coupled via Bluetooth. In order to meet different user groups, the user profiles "Expert" and "Standard" can be set.

The measured values are automatically saved in a database, a PDF report with a preselectable company logo is created automatically at the end of a test procedure.

The special features of the Smart-Test HT700 are the standby power measurement according to EU regulation 1275/2008 and a lightning-fast polarity reversal.

Product features:

  • Test according to DGUV regulation 3, DIN VDE 0701-0702
  • "Ready-to-use" The smartphone included in the scope of delivery has already installed the APP application and the APP barcode application and is thus prepared for direct use
  • Operation via Android app Test-Master with SQLITE3 database, PDF protocol creation with company logo and signature
  • Photo documentation, smartphone barcode reading function
  • Automatic limit value setting (protective conductor, insulation)
  • Measurement of extension cables and devices with protective extra-low voltage
  • Testing of permanently connected devices possible
  • Two-pole measurement (low resistance, insulation, substitute leakage current, voltage)
  • Checking the mains connection for PE connection and automatic shutdown in the event of a dangerous fault current of the device under test
  • Fast running of all active tests including function test with real-effective performance display in just one step
  • Standby measurement and lightning-fast polarity reversal
  • Leakage current and consumer current measurement with optional current clamp

Lieferumfang

  • Tester
  • Smartphone Xiaomi Redmi 7A
  • Red / black test leads, 2 m
  • Factory calibration certificate
  • Schuko connection cable
  • Bag for accessories

Accessoires (24 products)

Accessoires (24 products)

2008550
HT
2008550
Barcode labels 1000 pieces on a roll Dimensions of a label (WxH): 4 cm x 1.5 cm
Delivery time upon request
On Request
2002260
HT
2002260
Security badges round 15 mm (160 pieces)
Delivery time upon request
On Request
2002270
HT
2002270
Test badges security test badges round 30 mm (108 pieces)
Delivery time upon request
On Request
LZ-1
HT
LZ-1
Notching pliers for inspection badges (2002250)
Delivery time upon request
On Request
2002460
HT
2002460
Brush probe HT-POWER for testing polished metal surfaces
Delivery time upon request
On Request
2006420
HT
2006420
HT-Power Remote-ST for VDE test devices Remote control and database software
Delivery time upon request
On Request
756305
Benning
756305
Barcode sticker 50 x 17 mm number range 4001 - 5000
Ready to ship in 5 to 10 business days
€79.80
756306
Benning
756306
Barcode sticker 50 x 17 mm number range 5001 - 6000
Ready to ship in 5 to 10 business days
€79.80
2007210
HT
2007210
Transponder 125kHz, 30x15mm with cable tie, 1 PU
Delivery time upon request
On Request
2002581
HT
2002581
Transponder 125 kHz, round 18 mm, 1.5 mm thick, self-adhesive
Delivery time upon request
On Request
756301
Benning
756301
Barcode sticker 50 x 17 mm number range 0001 - 1000
Ready to ship in 5 to 10 business days
€79.80
756302
Benning
756302
Barcode sticker 50 x 17 mm number range 1001 - 2000
Ready to ship in 5 to 10 business days
€79.80
756303
Benning
756303
Barcode sticker 50 x 17 mm number range 2001 - 3000
Ready to ship in 5 to 10 business days
€79.80
756304
Benning
756304
Barcode sticker 50 x 17 mm number range 3001 - 4000
Ready to ship in 5 to 10 business days
€79.80
756307
Benning
756307
Barcode sticker 50 x 17 mm number range 6001 - 7000
Ready to ship in 5 to 10 business days
€79.80
756308
Benning
756308
Barcode sticker 50 x 17 mm number range 7001 - 8000
Ready to ship in 5 to 10 business days
€79.80
756309
Benning
756309
Barcode sticker 50 x 17 mm number range 8001 - 9000
Ready to ship in 5 to 10 business days
€79.80
2006800
HT
2006800
CEE16A DS adapter CEE 16A residual current adapter for protective conductor current measurement for HT700 + MultiTest
Delivery time upon request
On Request
2006900
HT
2006900
CEE32A DS adapter CEE 32A residual current adapter for protective conductor current measurement for HT700 + MultiTest
Delivery time upon request
On Request
2008520
HT
2008520
HT-Multi barcode scanner with RS-232 interface for MultiTester HT700 +
Delivery time upon request
On Request
2008660
HT
2008660
Software HT-Multi Protocol software for MultiTest HT700 +
Delivery time upon request
On Request
2002110
HT
2002110
CEE adapter 16 / 32A for 3-phase test objects, for MultiTester HT700 +
Delivery time upon request
On Request
2003800
HT
2003800
Transponder 125kHz, pigeon ring, 8mm with clip lock
Delivery time upon request
On Request
1009390
HT
1009390
HT77N leakage current clamp TRMS from 10 µA to 100 A AC
Delivery time upon request
On Request

News and Knowledge

dataTec unboxed is the new video series from dataTec for product presentations and news from the world of measurement an...

01/08/2023
Reading time 10 Min.
464
2

About the Manufacturer

HT
HT is one of the leading European manufacturers of measuring instruments for testing electrical quantities, energy and electrical installations. The Italian company was founded in 1987 and has its own subsidiaries in Spain and Germany.

Last Seen Products

Product added to compare
Product Compare added Product Compare