GW Instek PSB-1400L | Programmable DC laboratory power supply, 1 channel, 0… 40 V / 0… 40 A / 400 W.
Output power: 400 W. Output voltage: 0… 40 V DC Output current: 0… 40 A Serial operation: 2 devices = max. 80 V Parallel operation: 4 devices = max. 160 A Constant voltage operation (CV) Constant current operation (CC) Protection functions: overvoltage protection (OVP), overcurrent protection (OCP), undervoltage limit (OVL) LCD display and easy to use menu Interface: USB host, LAN. Optional: GPIB Weight: 6.8 kg, W 214 x H 124 x D 350 mm Connection: 100… 240 V AC Scope of delivery including manual, programming instructions, power plug, output connection cover, USB cable, analog connection set, chassis connection cable
PSB-1400L | Power supply unit, DC, 1 channel 40V / 40A, 400W, LAN, USB, analog
The programmable 1-channel bench-top laboratory power supply PSB-1400L has an adjustable voltage of 0… 40 volts, an adjustable current of 0… 40 amps and an output of 400 watts. The power source can be operated intuitively via the user-friendly display.
The reliable GW Instek bench-top laboratory power supply is ideally suited for research and development (R&D), use in the laboratory and in production.
Connect up to 4 PSB-1400L in parallel to achieve a maximum current of up to 160 A. Connect 2 PSB-1400L in series to achieve a maximum output voltage of 80 V.
Set the slope (V / s and A / s) of your current and voltage measurement functions to suit your requirements. With the 10 presettable sequencer functions you can start sequential curve processes without a PC. You can also use the trigger functions to set positive or negative pulse signals.
The PSB-1400L is equipped with a bleeder resistor to protect your device under test (DUT) from damage. The overcurrent protection of the power source can be switched on or off directly via the display and can be activated with a delay of 0.1 - 2.0 seconds. Of course, the power supply has overvoltage and overheat protection.
Lieferumfang
including manual, programming instructions, power plug, output connection cover, USB cable, analog connection set, chassis connection cable
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the
beginning, the company has specialized in the development and production
of electronic test and measurement equipment. The first product focus
was power supplies. Today, Good Will has more than 300 different
products from the fields of oscilloscopes, spectrum analyzers, signal
generators, digital multimeters and LCR measuring instruments in its
program.
Good Will has been listed on the Taiwan Stock Exchange
since 2000. Development and production focus on high quality and low
cost measuring instruments for production, laboratory and education.
Headquartered in Taipei, Good Will has subsidiaries in China, America,
Japan, Korea and Malaysia. The products are sold in over 80 countries.