The CA6108 appliance tester is used for safety testing of electrical equipment in accordance with DIN VDE 0701 / VDE 0702, OVE EN 50678 / EN 50699 resp. ÖVE 8701 and DGUV regulation 3 as well as electromedical devices according to DIN VDE 0751-1 or ÖVE 8751. Optionally, the device also enables the testing of arc welding devices according to DIN VDE 0544-4 / OVE EN 60974-4.
The ideal test device for your mandatory tests in accordance with DGUV regulation 3 (BGV A3) with automatic test sequence and pass/fail evaluation.
The large, illuminated display guides the user through each test sequence with contextual help in plain text as well as connection diagrams. All results are displayed with a pass/fail rating.
Thanks to the full QWERTY keyboard and the large internal memory, all information about the test samples and comments on their test results can be stored directly on site in the appliance tester. This eliminates the need for time-consuming post-processing when creating the test report. In order to avoid new entries for repeat tests, it is also possible to transfer master data to the device. All information or measurement configurations for the test can be called up and reused directly or with the help of a barcode or transponder scanner.
All measurements are carried out using just one socket and a measuring probe with fully automatic line compensation. An additional cold appliance test socket is available for direct, complete testing of cold appliance connection and extension cables - standard or optional with RCD type A/B or PRCD, PRCD-S, PRCD-K. Various extension lead adapters for different three-phase systems (16, 32 or 63A) are also available.
With the help of a current clamp available as an accessory, leakage currents can be measured directly on permanently connected devices without having to disconnect them. Various suitable measuring adapters are available for measuring leakage currents on three-phase current transformers.
In order to track down the power guzzlers in standby mode, it is possible to enable standby current and power measurement in accordance with EU Regulation 1275/2008 on request.
The CA6108 appliance tester has a large internal memory for 100,000 measurements and a USB interface for bidirectional data exchange with a PC via USB stick or cable.
The extremely easy-to-use C.A Appliance „Standard" PC software offers the option of automatically managing and archiving master and test data in standard formats (Microsoft Word and Excel) in addition to report generation.
The following measurement and test functions are available:
- Protective conductor resistance measurement: 0.000 Ω to 4.000 Ω
- Insulation measurement: 0.00 MΩ to 20.00 MΩ
- Differential current measurement: 0.00 mA to 20.00 mA
- Replacement leakage current measurement: 0.00 mA to 20.00 mA
- Leakage current from applied part: 0.000 mA to 4.000 mA
- Device leakage current: 0.000 mA to 4.000 mA
- Transient current measurement; 0.000 mA to 4.000 mA
- Current measurement: 0.00 to 20.0 A
- Current measurement via clamp: 0 to 40.00 A
- Voltage measurement: 0.0 V to 260.0 V
- Power measurement: 0 W to 4.000 W
- Patient leakage current measurement up to 4,000 mA
- Replacement patient leakage current measurement up to 4,000 mA
- Standby current measurement up to 40 mA
- Standby power measurement up to 500 mW
- Idle voltage measurement up to 350.0 V
