The PASS / FAIL function is used to monitor up to six freely definable limits (upper and lower limit values) which can be selected from 14 measured variables (e.g. U, I, P, S, Q, F). It is output on the display and optionally via the rear analog or digital output.
The analog output supplies a voltage proportional to the limits (± 5 V).
Four BNC sockets can be assigned to different sources / sinks. At the analog output, you can choose between the limits (PASS / FAIL) and the sizes U, I or P as the source. The signal at the analog input (± 10 V) can also be shown on the display at 16 with resolution. The digital output can be assigned to the limit (PASS / FAIL) or the current measuring frequency.
The signal at the digital input is available as additional information on the display as status (0/1), frequency (up to 200 kHz) or PWM (0% to 100%). Both inputs can also be recorded (logging).
